Digital Reception Test; Factory Settings - Philips CINEOS 42PFL7423 User Manual

6.5

Digital reception test

If you receive Digital TV broadcasting you can verify
the quality and signal strength of a specific channel.
‡ Select a channel.
® Press Menu.
Ò Select Setup > Installation > Channel
installation > Digital:Test reception.
† Press π to enter
º Press .
OK
◊Press the green key to start the test.
Information on the quality and the signal
strength of this channel is shown.
‹ Use the cursor keys to change the frequency to
improve the signal or enter a new frequency
directly with the digit keys.
≈Press the green key to store the frequency if
the signal quality and strength are good.
Ú Press the red key to return to the Channel
installation menu.
œ Press Menu to quit the menu.
à Tip
To achieve the best results, contact a specialised
antenna installer.
6.6

Factory settings

You can want to return to the original factory
settings. Only picture and sound settings are reset.
‡ Press Menu.
® Select Setup > Installation > Factory settings.
Ò Press π to enter the Factory settings menu.
† Press .
OK
º Press Menu to quit the menu.
Channel installation 29