Sharp VL-RDI U Service Manual page 11

VL-RI31 UJ
9. Open the cassette comportment lid, remove the screws (e)(2 PCS.) and (i)(one PC.), remove the L cabinet.
Tilt Frame
10. Remove the FPC and two LCD panel FPCs from the connectors, remove the screws (u)(2 PCS.) and LCD panel unit.
FPC Conn
\
ecter
LCD Panel FPC Connecter
(Removal of the cassette lid)
11.
Turn the tilt frame toward A, and the screws (c)(one PC.) and (g)(one PC.).
ie
12. Disconnect the read wire from the connectors.
Pick up between step of center section in the cassette lid shaft with a pincette, and remove slide the cassette lid toward
A. (Refer to Fig. 2)
c
0
A
4-3