Auto Operation (Optional); Dimmer (Optional); Auto Changeover - LG LSU5NP5A Owner's Manual

Wall mounted
Table of Contents

Advertisement

ADVANCED FUNCTIONS
16

Auto operation (Optional)

(Artificial inelligence)
Cooling-only models
In this mode, the fan speed and the
temperature adjust automatically,
based on the room temperature.
1
Press
to turn on the power.
2
Press
repeatedly to select auto operation.
3
Press
or
to select the desired oper-
ation code if the temperature is higher or
lower than the desired temperature.
AI
!
NOTE
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.

Dimmer (Optional)

In Dimmer Mode Unit Display will be turned OFF
completely but system will be in running state.
1.
Make sure that remote & Air conditioner are ON.
2.
Press
to activate/deactivate dimmer
LIGHT
function.
Dimmer Mode will be cancelled if any key
except
is pressed
(Power Key will turn OFF the Unit).
This function may not be supported by
Auto Restart feature (depending on
selected models).
Code Description
2
Cool
1
Cool slightly
0
Maintain
room
temperature
-1
Heat slightly
-2
Heat

Auto Changeover

(Optional)
Heat pump models
This operation is basically heating or cooling function
of the air conditioner. But during this operation the
controller change the operation mode automatically
to keep the temperature within ±2
the setting temperature.
1
Press
to turn on the power.
2
Press
repeatedly to select auto operation.
-
is displayed on the display screen.
AI
AI
3
Press
or
to set the desired
temperature.
- The temperature range is 18°C -
4 Press
repeatedly to select the fan speed.
!
NOTE
• This function may not be supported, de-
pending on the model.
*
Mosquito Away
Operation (Optional)
Mosquito Away is a device to radiate frequency
which mosquitoes don't like.
1 Press
- To start Mosquito Away function.
2 Press
again to finish
!
NOTE
• You can use this function by pressing
turning the air conditioner ON. (In this case, Fan
speed can not be changed).
At this time horizontal vane will be at default position
& the fan speed will be low.
• This function can be used with other function like
timer, monsoon.
• This function may not be supported depending on the
model.
• The Mosquito Away performance can be different
depending on the customer's environment.
*
For detail refer Disclaimer.
°
C with respect to
30°C
without

Advertisement

Table of Contents
loading

Table of Contents