Main Unit BASS CONTROL CD DOOR CD DOOR KNOB VOLUME+/- STANDBY/ON FOLDER- LIGHT FOLDER+ 10. FUCTION 11. REPEAT STOP PLAY/PAUSE USB CONNECTION AUX-IN JACK NFC AREA SD CARD SLOT PROG. DC IN JACK POWER ON/OFF SWICH BATTERY COMPARTMENT Remote Control STANDBY/ON MUTE CD/USB/SD MODE...
Page 4
INSTRUCTIONS FOR ATTACHING THE STRAP Press the buckle and fix them in position „A‟ and „B‟ (see below diagram). The length of the strap can be adjusted on the strap.
OPERATING INSTRUCTIONS POWER SOURCE 1. Connect the AC adaptor to the DC IN jack on the back of of the unit firmly, and plug it into a wall outlet. 2. Slide the power switch on the back of the unit to “ON” positon, the unit is in standby mode, and display shows “--:--”...
The unit is now in pairing mode, it will last for 30 seconds. Choose the Bluetooth menu in your Bluetooth device, and from the found devices, select the “PBMSPG80 ”. If you are prompted to enter the PIN code, please enter "0000"(four zeros).
OPERATING INSTRUCTIONS When you turn off/on the unit or the Bluetooth device, the unit will connect to the Bluetooth device automatically within 30 seconds. Otherwise, you need to connect it manually on the Bluetooth menu in your Bluetooth device. Depending on the device manufacturer, some Bluetooth devices need to perform the pairing again.
OPERATING INSTRUCTIONS PLAY/PAUSE MODE 1. When the PLAY/PAUSE button is pressed during CD/MP3 stop mode, the first track will play. The track number and elapsed track playing time appear in the display. 2. For interruption while the CD/MP3 playback disc is playing, press the PLAY/PAUSE button once.
OPERATING INSTRUCTIONS REPEAT MODE (MP3) Repeat One: When the MP3 play mode, press the REPEAT button once, the REPEAT indicator show on the display. This single track of music will be repeated. Repeat Album: When the MP3 play mode, press the REPEAT button twice, the REPEAT ALBUM indicator show on the DISPLAY.
OPERATING INSTRUCTIONS 3. Repeat above procedure until all desired tracks have been programmed. 4. For CD playback, a total of 20 tracks can be stored in memory. For MP3 playback, a total of 99 tracks can be stored in memory. 5.
OPERATING INSTRUCTIONS AUX IN FUNCTION You can play from an external audio device such as MP3 player through this unit. Connect a red/white audio cable (not supplied) to the AUX IN sockets and to the audio output sockets on the audio device. Then, press the FUNCTION button on the unit or AUX/BT button on remote control to select the AUX mode.
Need help?
Do you have a question about the PBMSPG80 and is the answer not in the manual?
Questions and answers