SVP HDR-106 Manual
  1. Manuals
  2. Brands
  3. SVP Manuals
  4. TV Tuner
  5. HDR-106
  6. Manual

SVP HDR-106 Manual

Mpeg-2/h.264 – 4:2:2 – 10 bits dvb-t2/t diversity 6 dvb-s2/s receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SVP
Broadcast
Microwave
HDR-106
MPEG-2/H.264 – 4:2:2 – 10 bits
DVB-T2/T DIVERSITY 6
DVB-S2/S RECEIVER
MANUAL V7.0
Accessories included in this manual:
Down Converter
QPT Pan & Tilt Positioner
Multisector Antennas

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDR-106 and is the answer not in the manual?

Questions and answers

Summary of Contents for SVP HDR-106

  • Page 1 Broadcast Microwave HDR-106 MPEG-2/H.264 – 4:2:2 – 10 bits DVB-T2/T DIVERSITY 6 DVB-S2/S RECEIVER MANUAL V7.0 Accessories included in this manual: Down Converter QPT Pan & Tilt Positioner Multisector Antennas...
  • Page 2 This chapter indicates the available connections of the receiver, their characteristics and the installation. Index A, B, C, D: Accessories available for this receiver. Index E: Video over IP PC monitoring HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 3 Please read these instructions carefully, and keep them in hand in case you have to refer to them. About this manual HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 4 <> These symbols mean that the parameter can be modified in the same screen with the right and left keys. Important Notes HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 5 13.Only authorized personnel should open the product and any repair or warranty will be invalidated if the seals are broken. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 6 7. In the case of injuries to the mouth, it may be necessary to use mouth-to-nose resuscitation. Seal the victim’s mouth with your cheek and blow firmly into his nose, proceeding as above. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 7 DRY clean dressing. d) Oil or grease in any form should not be applied. e) If severely burnt, get the victim to hospital immediately. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 8: Table Of Contents

    3.7.2.2.3 Decoder Encoding System Screen ......61 3.7.2.2.4 Decoder Audio Status Screen ........62 3.7.2.2.5 Decoder Data Screen ..........63 GPS Screen ..............64  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 9 Autotracking ..............122 6.2.7 DESCRAMBLING .............. 127 6.2.8 TSoverIP Output ............. 128 6.2.9 UNIT ................130 Web Page Setup Notes ............137 SNMP .................. 137 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 10 Index B: QPT User’s Guide ............169 B.1 Description ................170 B.2 Technical Specifications ............171 B.2.1 QPT-20 ................171 B.2.2 QPT-35 ................173 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 11 E.1 Introduction ................195 E.2 VLC media player ..............195 E.2.1 VLC as a player ..............195 E.2.2 VLC as a recorder ..............201 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 12: Chapter 1: Introduction

    Besides, the ASI output and the Transport Stream over IP output enable the user to handle the receiver as a demodulator. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 13 Four user-friendly interfaces are available: front panel and display, web-browser and SNMP connection. Figure 1.1 Connection figure between the HDR-106 and the AM-205 antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 14: Chapter 2: Technical Features

    LDPC FEC (DVB-S2): 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 FEC (DVB-S): 1/2, 2/3, 3/4, 5/6, 7/8 Baud Rate: 2 to 45 Mbaud/s HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 15 Audio: Output: HDMI/ SDI embedded/ AES Digital/ Analogue Analogue: 2 Stereo/ 4 Mono SDI embedded: 1 Group (4 audio channels) AES/EBU: 2 Stereo channels HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 16 AC input: 100 to 240 V DC input: 11 to 36 V Consumption: 55 W @ 12V (with 6 DC connected) Recovery time: 9 seconds HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 17 1 RU, 255 mm (10 inches) depth Weight: 3 kg (6.6 lb) Environmental: Aeronautical: RTCA / DO-160 compliant Temperature range: -10 to 50 ºC Height: 4.500 m Humidity: HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 18: Chapter 3: Receiver Operation And Menus

    Table 3.1 Linkages between the input and the character displayed Next, the main screen for each input type (DVB-T2, DVB-T, ASI and IP) is shown: HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 19: St Main Screen For The Dvb-T2

    Modulation (QPSK, 16QAM, 64QAM, 256QAM) LDPC FEC (1/2, 3/5, 2/3, 3/4, 4/5, 5/6) Guard Interval (1/4, 19/128, 1/8, 19/256, 1/16, 1/32) Bandwidth (1.7, 6, 7, 8 MHz) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 20 Before the audio status field, there could be a padlock depending on the encryption mode. If the input signal is BISS encrypted, then a padlock will appear in this field. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 21: St Main Screen For The Dvb-T

    Modulation (QPSK, 16QAM, 64QAM) FEC (1/2, 2/3, 3/4, 5/6, 7/8) Guard Interval (1/4, 1/8, 1/16, 1/32) Bandwidth (5, 6, 7, 8 MHz) Carriers (2K and 8K) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 22: St Main Screen For The Asi Input

    Reception Frequency Number of Cuts Modulation Carriers Guard Bandwidth Interval Figure 3.2 Main screen 1 DVB-T 3.1.3 1 Main Screen for the ASI Input HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 23 420/S Received Signal Type Data Status (06 services) PROGRAM 001 Number of Name of the services selected service Figure 3.3 Main screen 1 ASI HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 24: St Main Screen For The Ip Input

    420/S Received Signal Type Data Status (06 services) PROGRAM 001 Number of Name of the services selected service Figure 3.4 Main screen 1 IP HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 25: Nd Main Screen (For The Dvb-T2/T)

    The third main screen (figure 3.6) displays this information for each IF input: Input signal level: It displays a number of bars. A high number of bars means a high level of the received signal. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 26: Th Main Screen (For The Dvb-T2)

    1 to 9 where a received signal of value 1 is a very noisy signal whereas a received signal of value 9 means a very clean received signal. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 27: Reception Examples

    GPS in the transmitter is connected to the satellites. If before the audio status a padlock appears, it means that the received signal is encrypted. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 28 The audio 1 and audio 2 status indicators are darkened because it is not receiving any audio signal. Moreover, the data status indicator is darkened because there is no data. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 29: Tft Screen

    5. Select Audio Speaker and press right and left keys to enable or disable the two speakers. Left Speaker Right Speaker Headphones connector Figure 3.11 Speakers & Headphones audio outputs HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 30: Leds

    The LED lights up when a change in the configuration of the device is  being processed. ON/OFF LED ALARM LED REMOTE LED STATUS LED Figure 3.12 HDR-106 LEDs HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 31: Front Panel

    If the power fails while the equipment is operating, it will restart automatically when the power returns, not being necessary to press the on/off button again. Figure 3.14 ON/OFF button HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 32: Ok Button

    Figure 3.17 Left and Right buttons HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 33: Up And Down Button

    PID parameter’s values. Pressing up and down arrows the value of those parameters can be changed, increased or decreased respectively. Figure 3.18 Up and Down buttons HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 34: Menus

    In the next page it is shown a scheme that specifies the different menu options available. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 35 Port BitRate IF Cable IF Cable Signal Quality Spectrum Inv Output Delay Demod Demod TP per IP Bandwidth Frequency Monitor Monitor Roll-off Bitrate Modulation HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 36 Dest IP & Port Voltage Mask Audio Speaker Omni Logbook Gate Group TP per IP Admin Pass Protocol User Pass Time to Live IP/ASI Output HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 37 Version Keyboard QuickSet Update Lock Protocol Firmware Night Mode Distance Units Restore Default Alarm Beep Speed Units Clock Timeout Reset Location Labels VoIP MAC HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 38: Menu Navigation

    Next, the different menus and submenus with the options and the different parameters available are shown. Furthermore, in each figure, example parameters are shown. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 39: Menu Structure

    Unit: Parameters related to the Web Server, UART and other internal options of the receiver are configured here as well as other characteristics owned to the HDR-106 receiver. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 40: Input Select Menu

    1.840,0 MHz DVBT Tuner: 1 Enable > DVBT IF Cable: 1 LMR-400 L: 001m > DVBT Demod Monitor: > Figure 3.20 DVB-T Input Select Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 41 Tuner 2 (Enable, Disable)  Tuner 3 (Enable, Disable)  Tuner 4 (Enable, Disable)  Tuner 5 (Enable, Disable)  Tuner 6 (Enable, Disable)  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 42  TG (1/4, 1/8, 1/16, 1/32)  Level (dBm)  MER (dB)  C/N (dB)   Table 3.6 DVB-T Input Select menu options HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 43 FEC: 1/2 TG:1/4 DVBT Tun1 Level: -30 dBm MER: 6 dB DVBT Tun1 CN: 28 dB BER: 10-7 Figure 3.22 DVB-T Demodulation Monitor Screen HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 44: Dvb-T2

    DVBT2 Tuner: 1 Enable > DVBT2 IF Cable: 1 LMR-400 L: 001 m > DVBT2 Demod Monitor: > Figure 3.23 DVB-T2 Input Select Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 45 Tuner 2 (Enable, Disable)  Tuner 3 (Enable, Disable)  Tuner 4 (Enable, Disable)  Tuner 5 (Enable, Disable)  Tuner 6 (Enable, Disable)  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 46 Time IL Type (time interleaving mode)  Length (number of frames in one interleaving frame)  Table 3.7 DVB-T2 Input Select menu options HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 47 DVBT2 Tun1 Const: 16QAM FEC: 3/5 TG: 1/4 DVBT2 Tun1 Mod:4K Spec: Normal Rot:Disable DVBT2 Tun1 Time IL Type:- Length:--- Figure 3.25 DVB-T2 Demodulation Monitor Screen HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 48: Dvb S2/S (Optional)

    DVBS2/S  FEC Frame Length: ---- Pilots: ---- DVBS2/S  Symbol Rate: Spectrum Inv: DVBS2/S  Frequency: Bitrate: Figure 3.26 DVB S2/S Input Select Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 49 RF level (reading parameter)  SNR (reading parameter)  MER (reading parameter)  Es/No (reading parameter)  Eb/No (reading parameter)  Link Margin (reading parameter)  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 50 In this field, the FEC frame length and the pilots of the received signal are specified. (reading parameters) For the FEC frame length, there are two options available: Normal  Short  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 51 In this field, the frequency at which the signal is received and the bitrate of the received signal are shown. Table 3.8 DVB-S2/S Input Select menu option HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 52: Asi

    OK: Yes / X: No Figure 3.30 Change the service Then, press the OK button again to change the service or the cross button not to change it. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 53 OK: Yes / X: No Figure 3.34 Change the service Then, press the OK button again to change the service or the cross button not to change it. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 54 InpIP Status: Channel ENABLE InpIP Protocol: UDP InpIP Packet Size: 188 InpIP BitRate: 0.00Mb InpIP PCR: No Present Figure 3.35 IP Input Select Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 55 So as to enter the multicast address, press OK button so as to be able to configure the multicast address. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 56 This field displays the status of the IP input. (reading parameter) InpIP  Protocol: This field displays the protocol used for the communication. (reading parameter) The possible options are:   HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 57 100 ms Program Clock Reference, or PCR packets are. This parameter indicates if PCRs are found in incoming TS. (reading parameter) Table 3.9 IP Input Select menu option HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 58: Decoder Menu

    Decoder Data: 9600 NONE 1 [USER] <> Decoder GenLock: Ref Lost Offset: 0pix Decoder Frame Error: Freeze < DecoderFrame Without Signal: Freeze > Figure 3.36 Decoder Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 59: Decoder Mode Screen

    OK: Yes / X: No Figure 3.39 Change the service Then, press the OK button again to change the service or the cross button not to change it. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 60 OK button and then, with the UP, Down arrows select the desired number. So as to save the introduced value the OK button must be pressed again. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 61: Decoder Video Format Screen

     1080/50i For MPEG-2 signals, the auto option is not available. It is necessary to select one of the other options for the received signal. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 62: Decoder Encoding System Screen

    Delay, the receiver will indicate Super Low Delay. This means that the receiver is not capable of distinguishing between Super Low Delay and Ultra Low Delay. Table 3.11 Decoder Encoding System menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 63: Decoder Audio Status Screen

    SDI output signal. So as to select the desired group, press the Right, Left buttons. (eligible parameters) Table 3.12 Decoder Audio Status menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 64: Decoder Data Screen

    The parity options are None, Even, Odd. (eligible parameters) Stop Bits: The options are 1 or 2. (eligible parameter) Table 3.13 Decoder User menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 65: Gps Screen

    (reading parameters): Distance between transmitter & receiver (km)  Direction from transmitter to receiver (degrees)  Height difference (m)  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 66 Local Altitude: In this file the user can set the height and the number of satellites. (editable parameters) Table 3.15 Local GPS Information menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 67: Decoder Genlock Screen

    Continue with errors: If there is an error, the image is shown with  errors in the screen. Freeze: If there is an error, the image is frozen in the screen.  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 68: Decoder Frame Without Signal Screen

    Colour (10 sec): After 10 seconds, if there is not RF signal, the screen  becomes red. However, after 10 seconds, if there is not video signal, the screen becomes blue. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 69: Autotracking Menu

    GPS information (Local Manual and Local Altitude) are shown. Manual H: 061º V: 09º Δd:---.-km ΔH:---m Man <> L1 [ ]:-- C/N [ Figure 3.53 Parabolic Autotracking (Manual) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 70 GPS signal. Polarization:  polarization antenna selected. (eligible parameter) The available options are:  None  Vertical  Horizontal HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 71 Value T means the top antenna. Auto 1 2 3 [4] 5 T Δd: ---.-km Auto> ]:-- C/N [ Figure 3.57 Sector Autotracking (Auto) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 72 In this option, the autotracking is configured with an omnidirectional antenna and the different parameters related to it. DVB-T Autotracking: Omni < CA BISS: BISS-1 > Figure 3.60 Omni Antenna option HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 73: Ca-Biss Menu

    UserID: In this field, the UserID password must be introduced, which is valid only for BISS-E encryption. (editable parameter) Table 3.18 CA-BISS menu options HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 74 On the other hand, if the input signal is encrypted, the user must select the same sort of encryption (BISS-1 or BISS-E) as the one selected in the transmitter and the same keys used in the encryption step. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 75: Ip Output Menu

    Time to Live: 80 [1..255] IP/ASI Output: Always Descrambled < Figure 3.63 IP Output Options symbol appears when the device is connected to the destination device. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 76 If FEC option is enabled then, the only protocol which can be used is RTP. (eligible parameter and editable if enable option is chosen) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 77 When a parameter of the TS over IP menu options is changed, it takes 30 seconds to the device to be configured and work again. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 78: Unit

    Enable < Unit Audio Monitor Audio 1 > Unit Alarms Unit Monitor Unit Webserver & SNMP Unit Miscellaneous Unit Firmware Figure 3.64 Unit Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 79: Unit Video Monitor Screen

    Audio Monitor Audio 1 > Audio Monitor Audio Volume <> Audio Monitor Audio Speaker Right <> Figure 3.66 Audio Monitor Menu HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 80: Unit Alarms Screen

    In this option, different alarms which appear in the device are shown. The different alarms that can appear in the receiver are: Input Signal Not Present  Decoder Is Not Decoding  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 81: Unit Monitor Screen

    Pressing the OK button allows the user to access to the Logbook menu where the different events occurred are shown. (reading parameter) Table 3.21 Unit Monitor menu options HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 82 There are displayed the time at which the event occurred, the date of the event and a short description of that event. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 83: Unit Webserver & Snmp Screen

    Up and Down keys select the desired number. So as to change from one character to another, press Right and Left keys. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 84 Table 3.22 Webserver & SNMP menu options The IP address of the Webserver, the Local IP address and the destination IP address must be different. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 85: Unit Miscellaneous Screen

    Misc Network MAC 70-B3-D5-1A-C3-00 Misc QuickSet Protocol: PTCR-20 > Misc Distance Units: Kilometers > Misc Speed Units: Knots > Misc Timeout Reset: 1440 min HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 86 1. If the state is three, then, the light in the screen will be the lowest among the four possible states. (eligible parameter) The available options are:     HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 87 If miles is selected, then, all the distances will be in miles and the same occurs if kilometers is selected. (elegible parameter) The available options are: Kilometers  Miles  HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 88 To disable this option, 0 value must be written. S/N: In this field the serial number of the device is shown (reading parameter). Table 3.23 Miscellaneous menu options HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 89: Unit Firmware Screen

    In this option, the equipment is restored to the first factory version. So as to restore the equipment to the initial set up, press OK button. Table 3.24 Unit Firmware menu options HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 90 Click on the Support tab. Figure 3.74 Updating firmware step 2 Click on Firmware. Figure 3.75 Updating firmware step 3 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 91 Go to Firmware field and then press the current version option to check the number of the version installed in the device (the first two digits). Figure 3.77 Updating firmware step 5 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 92 Don’t power off the device during the updating process. FIRMWARE UPDATE DON’T POWER OFF THE SYSTEM Figure 3.78 Updating process 1 Reading file 20% Figure 3.79 Updating process 2 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 93 Figure 3.80 Updating process 3 Reading file 100% Checking file 100% Flashing 1/5 30% Figure 3.81 Updating process 4 UPDATE FINISHED REBOOTING Figure 3.82 Updating process 5 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 94: Chapter 4: Autotracking Antenna (Optional)

    GPS at long distances for the automatic pointing (NX-820). In the next points, the two possible autotracking systems are described. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 95: Autotracking With Panel Switching

    Then, this signal is sent to the HDR-106 receiver. Figure 4.1 Autotracking with panel switching HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 96: Configuration

    Value T means the top antenna. Auto 1 2 3 [4] 5 T Δd: -------km Auto> ]:-- C/N [ Figure 4.4 Sector Autotracking (Auto) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 97 Right, Left buttons the user can select the value to be modified. So as to save the values, the OK button must be pressed. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 98: Autotracking With Positioner In 2 Axis

    QuickSet positioner and the HDR-106 receiver. Figure 4.7 Autotracking with positioner HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 99: Configuration

    When the Auto option is selected, it means that the parabolic antenna is aimed automatically to the transmitter device throughout the GPS coordinates of the transmitter and the receiver device. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 100 Right, Left buttons the user can select the value to be modified. So as to save the values, the OK button must be pressed. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 101: Chapter 5: Gps

    Once the information is kept inside the device, it can be sent to the HDR- 106 receiver. If the signal arrives correctly to the receiver system, then the HDR-106 will have all the GPS data available and this receiver device will be able to calculate the direction, distance, positioning... of the transmitter.

  • Page 102: Gps Receiver Screen

    Speed of the transmitter: It shows the speed of the transmitter in knot. Direction of the transmitter: The direction of the transmitter is shown in this field. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 103: Application Example 1 - Constant Positioning

    106 receiver. When this signal arrives to the receiver, the HDR-106 shows in its screen some GPS value like: Transmitter positioning Transmitter direction Distance from receiver to transmitter HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 104 GPS E20º45.512´ 10k47º1mt 04/10/13 N60º73.984´ S3 100km 100º 09:45:34 PC with Google Maps HDR-106 GPS screen Figure 5.3 GPS system example 1 picture HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 105: Hyperterminal Configuration

    1- Type a name for the connection and an icon from the list. Figure 5.4 HyperTerminal new connection 2- Configure the way in which the connection is going to be made. (COM1) Figure 5.5 Connect to HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 106 5- When GPS data is obtained, go for example to the Google Earth application and type the received coordinates. Figure 5.7 Google Earth example HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 107: Chapter 6: Web Server / Snmp

    Right, Left keys. Press the OK button so as to save the introduced value. Locl: 192.168.001.010 Mask: 255.255.000.000 Figure 6.3 Subnet Mask HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 108 Figure 6.6 User Pass Once the IP, Subnet Mask, Gateway, Admin Pass and User Pass are set and the laptop or PC is connected to the HDR-106, open the web browser and tip the IP given to the receiver. Press enter button in your computer and then the main screen will appear.

  • Page 109: Web

    If this field displays the word unlocked then, it means that there is no signal in the input of the device. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 110 The available options are 2K, 8K for DVB-T. (reading parameter) Spectrum: Here the type of the spectrum of the received signal is shown. The available options inverted normal spectrum. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 111 It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 112: Dvb-T2 Input

    In this option, the bandwidth of the received signal must be specified. The available options are 1.7, 6, 7 and 8MHz for DVB-T2. (eligible parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 113 In this field, the time interleaving mode is shown on the screen. (reading parameter) Time IL Length: In this field, the number of frames in one interleaving frame is displayed. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 114 It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 115: Asi Input

    (eligible parameter) Multicast Address: In this field the multicast address must be specified so as to receive the information properly. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 116 IP input. (reading parameter) TP per IP: In this option the number of Transport Stream packets per IP packet is displayed. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 117 It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 118: Decoder

    The available options are H.264 and MPEG-2. (reading parameter) Format: This field shows the video format of the received signal. The available options are 1080p, 1080i, 720p, 576i and 480i. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 119 1 input, this field displays the word “Present”. (reading parameter) [1] Coding type: This field displays the type of coding of the received audio 1 signal. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 120 In this field the baudrate at which the communication is stablished is configured. The available baudrates are 2400, 4800, 9600, 19200, 38400, 57600, 78600, 115200. (eligible parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 121 In this field, the audio 1 packet identifier must be introduced. (editable parameter) Audio2 PID: In this field, the audio 2 packet identifier must be introduced. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 122 It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 123: Autotracking

    The format of the GPS coordinates used is decimal minutes as shown in the next example: HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 124 Latitude: It shows the latitude position of the transmitter device. (reading parameter) Longitude: It shows the longitude position of the transmitter device. (reading parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 125 The polarity of the antenna is selected. (eligible parameter) The available options are: None, Vertical, Horizontal, RHCP and LHCP. H.Offset The desired offset of the antenna can be selected. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 126 Pan: Azimuth position of the antenna o Tilt: Elevation position of the antenna  Fold: The fold option is enabled. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 127 It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 128: Descrambling

    It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 129: Tsoverip Output

    RTP. (eligible parameter) TP per IP: In this field the number of Transport Stream packets per IP (from 1 to 7) can be configured. (editable parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 130 It is necessary to press the enter button to keep and save the new values on the screen. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 131: Unit

    6.2.9 UNIT Figure 6.15 Web Server Unit screen HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 132 (editable parameter). This IP is the IP that has to be set in the web browser to access to the Webserver and it must be different from the TSoIP Local IP and the Destin IP. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 133 Distance Units: If miles is selected then, all the distances will be in miles and the same occurs if kilometers is selected. (eligible parameter) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 134 Not Video Signal Input in the Transmitter  The destination IP address, the Webserver IP address and the TSoIP Local IP address must be different. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 135 Figure 6.18 Logbook information If it is wanted to clear de Logbook, press Clear Logbook button. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 136 The process to follow in Manual mode is: Figure 6.20 Manual Mode First step: Press the Dump Button whenever you want to capture the data. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 137 "Clear" button or change to another tab of the Webserver. Once the data is captured, open the text file to access to the information. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 138: Web Page Setup Notes

    SNMP is an application-layer protocol and it runs over UDP at the transport level. SNMP is based on a manager / agent model as it is shown below: HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 139: Snmp Commands

    After receiving the trap the NMS still has to poll the device to find out the details of the change. Table 6.1 SNMP commands HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 140: Mib

    SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Voltage" ::= {hdr-70 3} hdrTemperature OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS current DESCRIPTION "Unit temperature" ::= {hdr-70 4} HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 141 STATUS current DESCRIPTION "Location" ::= {hdr-70 8} hdrTrapIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS current DESCRIPTION "IP address where traps are sent" ::= {hdr-70 9} HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 142: Chapter 7: Block Diagram

    It also has an USB and Ethernet control connection. There is a power relay block that allows employing DC or AC power in the equipment. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 143 Figure 7.1 HDR-106 Block Diagram HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 144: Chapter 8: Equipment Installation

    Autotracking Figure 8.1 HDR-106 receiver connections All connectors of the rack-mount demodulator unit are on the rear panel, as shown in the figure below: HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 145 Output Outputs Output USB input CVBS Genlock DVB-T2/T GPS/DATA (firmware Output Output signal Remote upgrade) Input Figure 8.2 Back view of the HDR-106 receiver HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 146: Power Supply

    Power supply AC connection technical features Item Features Connector label POWER A.C. Connector type MLC Neutrik Supply voltage 100-240 V. (50/60Hz) Table 8.1 AC Power supply features Pinout HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 147 Description Table 8.2 AC Power supply connector pinout Connector needed NAC3FCA NAC3MPA HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 148: Dc Power Supply

    Conector type XLR-4 male Supply voltage 11-36 V. Table 8.3 DC Power supply features Pinout Description Table 8.4 DC Power supply connector pinout Connector needed HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 149: Intermediate Frequency

    Item Features Connector label LNB 1 … LNB 4 Connector type Type F Frequency L Band Impedance 75Ω Table 8.6 IF input features (DVB-S2/S) HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 150: Dvb-Asi Transport Stream

    ASI OUT Connector type BNC female Impedance 75Ω Standard EN50083-9 Packet length 188/204Bytes Maximum Bitrate 216 Mbit/s Table 8.8 DVB-ASI Transport Stream output connection features HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 151: Video Outputs

    HDMI connection technical features Item Features Connector label HDMI Connector type Type A Maximum Bitrate 18 Gbit/s Table 8.11 HDMI output signal connection features HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 152: Genlock

    Item Features Connector label GENLOCK OUT Connector type BNC female Impedance 75Ω Reference signal type Black burst Tri-level Table 8.13 Genlock output connection features HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 153: Transport Stream Over Ip (Optional)

    Persistent storage of configuration parameters. Unicast and multicast IP addressing. It is not possible to configure the equipment as IP input and IP output at the same time. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 154: Audio Output

    AUDIO 1 L&R Connector label 2 AUDIO 2 L&R ANALOG & AES/EBU Connector type DB-9 male Table 8.15 Analogue and AES/EBU audio outputs connections features HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 155 XLR-3 Right pin DB-9 pin Table 8.17 XLR-3 Right to DB-9 pinout XLR-3 AES/EBU pin DB-9 pin Table 8.18 XLR-3 AES/EBU to DB-9 pinout HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 156: Gps

    Received Data to the PC NOT USED NOT USED NOT USED GPS Data to the Receiver NOT USED NOT USED Table 8.20 GPS data cable connector pinout HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 157 Figure 8.3 GPS connector scheme HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 158 Received Data to the PC NOT USED NOT USED NOT USED GPS Data to the Receiver NOT USED NOT USED Table 8.22 GPS data cable connector pinout HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 159 Figure 8.4 GPS connector scheme HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 160: Autotracking (Optional)

    Table 8.23 Autotracking connection features (for an AMS multisectorial switch antenna) These are the pins used for the control of the polarity of the AMS multisectorial switch antenn. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 161: Remote Control

    A and its pinout is: USB connection technical features Item Features Connector Label Connector type Type A Table 8.26 USB input connection technical features HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 162: Rack Unit Installation

    Figure 8.6 Down-Converter The power supply to the down-converters should be disabled in the receiver when the down-converters are being installed. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 163: Index A: Dc-Cofdm User's Guide

    5. The RF connectors recommended by SVP Broadcast Microwave are manufactured by Rosenberger and Suhner. If these connectors are not used, the use of high quality connectors is recommended. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 164: Description

    The equipment is waterproof. It can work permanently under extreme weather conditions. The down-converter is a very important element in COFDM links, which require maximum signal quality when using 64QAM 256 QAM modulations. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 165 The maximum fix mast diameter is 60 mm. In the following figure, the Down-Converter is shown: Figure A.1 Down-Converter HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 166: Technical Specifications

    DC Connector IF output N connector Table A.2 Power supply specifications A.2.3 Consumption Item Specifications DC consumption at 12 V 350 mA Table A.3 Consumption HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 167: Physical Characteristics

    Max. fix tube diameter 60 mm Table A.4 Physical characteristics A.2.5 Environmental conditions Item Specifications Temperature range -40 to 60ºC Table A.5 Environmental condition HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 168: Block Diagram

    In this chapter, the block diagram of the DC down–converter is explained. This diagram has several parts related to the DC internal performance which are shown in blocks with different inputs and outputs. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 169 Figure A.2 DC Block Diagram HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 170: Index B: Qpt User's Guide

    4. Only authorized personnel should open the product and any repair or warranty will be invalidated if the seals are broken. Figure B.1 QPT Pan & Tilt Positioner HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 171: Description

    Designed to work in extreme environmental conditions, these connectors are also used throughout the defense and aerospace industry and in a variety of commercial tasks. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 172: Technical Specifications

    Table B.2 QPT-20 Serial IP features Mil-Spec Shock Vibration Item Specifications Passed Shock MIL-STD-810F Meth. 516.5 Passed Vibration MIL-PRF-49256A Table B.3 QPT-20 Mil-Spec Shock Vibration HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 173 Figure B.2 QPT-20 Pan & Tilt Positioner Figure B.3 QPT-20 Scheme Figure B.4 QPT-20 connection scheme HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 174: 173

    Table B.5 QPT-35 Serial features Mil-Spec Shock Vibration Item Specifications Passed Shock MIL-STD-810F Meth. 516.5 Passed Vibration MIL-PRF-49256A Table B.6 QPT-35 Mil-Spec Shock Vibration HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 175 Figure B.5 QPT-35 Pan & Tilt Positioner Figure B.6 QPT-35 Scheme Figure B.7 QPT-35 connection scheme HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 176: 175

    Table B.8 QPT-90 Serial features Mil-Spec Shock Vibration Item Specifications Passed Shock MIL-STD-810F Meth. 516.5 Passed Vibration MIL-PRF-49256A Table B.9 QPT-90 Mil-Spec Shock Vibration HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 177 Figure B.8 QPT-90 Pan & Tilt Positioner Figure B.9 QPT-90 Scheme Figure B.10 QPT-90 connection scheme HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 178: Index C: Nx-820 User's Guide

    3. Only authorized personnel should open the product and any repair or warranty will be invalidated if the seals are broken. Figure C.1 NX-820 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 179: Description

    This product is used in autotracking systems, when is required to transmit the position of the plane’s GPS at long distances for the automatic pointing. It allows transmission at distances higher than 250 kilometers. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 180: Technical Specifications

    TIFF (Time to First Fix) – Hot Start < 10 seconds Horizontal Accuracy < 10 meters Position Transmission Every 3 seconds Table C.4 NX-820 GPS HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 181: Index D: Multisector Antennas User's Guide

    4. Only authorized personnel should open the product and any repair or warranty will be invalidated if the seals are broken. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 182: Multisector Antenna

    6 mode; the up-down antenna allows the reception of the signal coming from the helicopter even if it is in the vertical direction. Figure D.1 AM-206 antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 183: Technical Specifications

    9 to 36 V by coaxial cable Filter 6 poles Cavity Insertion Loss 0.5 dB Connectors 6 x N female Table D.1 AM-206 Technical characteristics Figure D.2 AM-206 antenna schematic HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 184 Figure D.3 AM-206 antenna plane HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 185: Am-406L Multisector Antenna

    6 mode; the up-down antenna allows the reception of the signal coming from the helicopter even if it is in the vertical direction. Figure D.4 AM-406L antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 186: Technical Specifications

    Insertion Loss 0.5 dB Connector 6 x N female Mount Stainless steel bracket and U bolts Table D.2 AM-406L Technical characteristics Figure D.5 AM-406L antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 187 Figure D.6 AM-406L antenna schematic Figure D.7 AM-406L antenna distribution HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 188: Multisector Antenna

    4 mode and like point of reception of high gain in autonomous cameras of the mobile unit. Figure D.8 AM-204 antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 189: Technical Specifications

    10 poles Cavity Insertion Loss < 0.5 dB Connector 4 x N female Mount Stainless steel bracket and U bolts Table D.3 AM-204 Technical characteristics HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 190 Figure D.9 AM-204 antenna schematic Figure D.10 AM-204 antenna distribution HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 191: Ams Multisector Switch Antennas

    RF signal. These antennas have been designed to be used as transmitter and as receiver in a wide variety of applications. Figure D.11 AMS-206 antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 192: Technical Specifications

    AMS-206: 800 mm AMS-406: 456 mm Polarization 5 Panel antennas: Vertical 1 Up-down antenna: RHCP Connector N female Table D.4 AMS-206 and AMS-406 Technical characteristics HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 193 Figure D.12 AMS-206 antenna Figure D.15 AMS-406 antenna HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 194 Figure D.13 AMS-206 antenna schematic HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 195 These are the pins used for the control of the polarity of the AMS antennas : Description Vertical LHCP Ground Not used RHCP Horizontal Table D.4 AMS antennas connector pinout HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 196: Index E: Video Over Ip Monitoring On A Pc

    E.2.1 VLC as a player Step 1 Download the VLC from http://www.videolan.org, then, install it on the host computer. Figure E.1 VLC Media Player HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 197 An Ethernet cable must be used to connect the receiver with the computer. The output of the receiver that has to be used for this HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 198 Media Player on the PC. This picture will appear in the screen. Figure E.5 VLC Media Player main screen Step 4 From the VLC media player window, go to Media -> Open Network Stream. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 199 Destination IP: IP address of the device to which data is sent. Destination Port: Number of port of the device to which data is sent. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 200 Protocol: Type of protocol selected for the communication. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...
  • Page 201 Figure E.8 Connection diagram HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 – DVB-S2/S Receiver MANUAL 7.0...

  • Page 202: Vlc As A Recorder

    Figure E.9 VLC Media Player main screen Step 2 From the VLC media player window, go to View -> Advanced Controls. Figure E.10 VLC Media Player Advanced Controls HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 203 Figure E.11 VLC Media Player Advanced Controls buttons Step 3 Press play button to play the desired video and select a file from your computer pressing Add button. Figure E.12 Open Media HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 204 Press Record button to start recording and then press Record button again to stop it. A .ts file will be saved automatically in the user’s file “Documents” with “VLC record” name, the date and the hour. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 205 Direct current or Down Converter DVB-T Digital Video Broadcasting – Terrestrial DVB-T2 Digital Video Broadcasting – Terrestrial Second Generation ETSI European Telecommunications Standards Institute Forward Error Correction HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 206 Interval Guard Internet Protocol order Intermodulation Product Liquid Crystal Display Low Delay Light-Emitting Diode Low Noise Amplifier MPEG Moving Picture Experts Group NLOS Non Line of Sight HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 207 Serial Digital Interface Simple Network Management SNMP Protocol Thin-Film Transistor Transport Stream User Datagram Protocol Ultra High Frequency Universal Serial Bus VSWR Voltage Standing Wave Ratio HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 208 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 209 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 210 HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 211 Notes HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 212 Reprinting, reproduction and translation, in part or in whole, is forbidden without written authorisation from Broadcast Microwave S.L. SVP Broadcast Microwave reserves all rights regarding intellectual property rights. All rights reserved regarding modifications. HDR-106 MPEG2/H264 – 4:2:2 – 10 bits – DVB-T2/T Diversity 6 Receiver MANUAL V7.0...
  • Page 213 SVP Broadcast Microwave reserves the right to make changes to this manual and to the equipment without prior notice. Broadcast Microwave C/Zubiaurre 7 bajo 48215 Iurreta Vizcaya – Spain Tel: (+34) 94620 3722 info@svpbm.com www.svpbm.com...

Table of Contents