1. Manuals
  2. Brands
  3. Ganz Manuals
  4. Network Hardware
  5. NR1-4F23
  6. User manual

Ganz NR1-4F23 User Manual

Hd1080p 4cg/8ch/16ch
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PixelMASTER GXi Series NVR
User's Manual
1
05-2014-A
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NR1-4F23 and is the answer not in the manual?

Questions and answers

Related Manuals for Ganz NR1-4F23

Summary of Contents for Ganz NR1-4F23

  • Page 1 PixelMASTER GXi Series NVR User’s Manual 05-2014-A...

  • Page 2: Table Of Contents

    PixelMASTER GXi Series NVR User’s Manual TABLE OF CONTENTS BEFORE INSTALLATION ........................ 4 UPDATING SYSTEM F/W ....................5 1.1.1 WITH THE USB THUMB DRIVE ................5 1.1.2 UPDATING FROM THE WEB MENU ............... 7 DESCRIPTION OF FRONT PANEL .................. 9 DESCRIPTION OF REAR PANEL ...................
  • Page 3 PixelMASTER GXi Series NVR User’s Manual 6.7.3 SCHEDULE ......................53 6.7.4 OPTION ........................54 CONFIGURING NETWORK .................... 56 6.8.1 ETHERNET PORT ....................56 6.8.2 LOCAL PORT ......................57 6.8.3 DDNS ........................57 6.8.4 E-MAIL ........................58 REMOTE ............................59 WEB SERVER ......................... 59 7.1.1 CONNECT TO WEB SERVER ................

  • Page 4: Before Installation

    PixelMASTER GXi Series NVR User’s Manual 1. BEFORE INSTALLATION The Company shall not have any responsibility for any accident or damage that may incur during the use of the product. For your safety, we provide a few instructions about installation, manipulation, cleaning, assembly/disassembly of the product as below.

  • Page 5: Updating System F/W

    PixelMASTER GXi Series NVR User’s Manual UPDATING SYSTEM F/W 1.1.1 WITH THE USB THUMB DRIVE User can upgrade the system firmware by himself if required. F/W upgrading could be required to increase the stability and the reliability or apply the new updated features. The following steps are a progress to upgrade the f/w.
  • Page 6 PixelMASTER GXi Series NVR User’s Manual 1.1.1.2 Preparing new F/W in the USB thumb driver 1) Unzip firmware file. After unzip, you can see above system file. According to Upgrade field, number of downloaded file would be different. 2) Make the ‘dvr’ folder at the root of the USB thumb drive. The characters, ‘d’,’v’,’r’, in the folder name have to be a lower case not a capital.

  • Page 7: Updating From The Web Menu

    PixelMASTER GXi Series NVR User’s Manual 1.1.2 UPDATING FROM THE WEB MENU The web menu service prepared in the NVR provides the way to update the system F/W remotely. The following steps explain how to do this. To know the way how to access the internal web menu service, refer the section 7.1, ‘WEB SERVER’...
  • Page 8 PixelMASTER GXi Series NVR User’s Manual 8) While the update is on, the progress steps will appears such as below. 9) System shows the [COMPLETE] when update finished and reboot automatically. 10) When the whole update is completed, the NVR will restart. Turning off the power in any process of F/W updating cause the damage of the system.

  • Page 9: Description Of Front Panel

    PixelMASTER GXi Series NVR User’s Manual DESCRIPTION OF FRONT PANEL [Front panel 4ch NVR] 1.STATUS LED 3.FRONT USB 2.0 PORT Displays the information of the NVR (Stand – USB 2.0 ports. Provides functions like ‘Copy to USB By), Record / HDD read/write and Network transmission. storage’, ‘F/W Upgrade’...

  • Page 10: Description Of Rear Panel

    PixelMASTER GXi Series NVR User’s Manual DESCRIPTION OF REAR PANEL [Rear panel of 4CH NVR] [Rear panel of 8 & 16CH NVR] 1.Power Switch 9.RJ-45 Network Port( 1G Base-T) Switch to turn the NVR ON & OFF. Network port is used to 1G base-T, PC application software or Mobile application.

  • Page 11: Description Of Pin Assignment

    PixelMASTER GXi Series NVR User’s Manual DESCRIPTION OF PIN ASSIGNMENT [Terminal block of 4CH NVR] Description 485 – data signal 485 + data signal Relay output (Normal Open) Relay Ground Relay output (Normal Close) Sensor Ground Sensor 4 Sensor 3 Sensor 2 Sensor 1 [Terminal block of 8CH NVR]...
  • Page 12 PixelMASTER GXi Series NVR User’s Manual [Terminal block of 16CH NVR] Description Sensor 1 Sensor 2 Sensor 3 Sensor 4 Sensor 5 Sensor 6 Sensor 7 Sensor 8 Sensor Ground Sensor 9 Sensor 10 Sensor 11 Sensor 12 Sensor 13 Sensor 14 Sensor 15 Sensor 16...

  • Page 13: Getting Started

    PixelMASTER GXi Series NVR User’s Manual 2. GETTING STARTED Controlling and setting NVR by remote control is limited to some of function, recommend you to use mouse operation of NVR for using all the function. CONNECT AND SWITCH ON  Please check if power of IP camera is turn on.

  • Page 14: Loading

    PixelMASTER GXi Series NVR User’s Manual LOADING [Loading….] When NVR is prepared for initial operation, display system preparing screen as above and show booting progress. From loading screen display, recording starts according to pre-set condition. When loading, screen could be flashed, happening odd color while NVR is processed to optimize display.

  • Page 15: Live View

    PixelMASTER GXi Series NVR User’s Manual 3. Live View [live mode of 4 channels] [live mode of 16 channels] Recommend you to connect camera first before NVR starts. TOOL BAR You can view following Tool Bar when you move the mouse to the bottom of Live Screen. The Tool-box display when mouse pointer move to bottom of screen, disappear after pre-defined menu setting time or exit with exit button ( ).

  • Page 16: Status Display

    PixelMASTER GXi Series NVR User’s Manual 3.1.1 STATUS DISPLAY You can check current time / Network connection / USB storage connection/ Auto sequence/ HDD location currently recorded / Audio. : Display current time. : Shows User connection : Shows Network connection. : Shows USB Storage connection : Shows Auto sequence : Shows HDD location which is currently recorded.

  • Page 17: Setup

    PixelMASTER GXi Series NVR User’s Manual 3.1.3 SETUP If you press main menu button, main menu will be POP-UP. 3.1.4 VA (Video Analytics) This menu is for using IP camera which supports Video Content Analytics. NVR doesn't support VA configuration of IP camera. Following menu is for NVR which can handle VA meta data coming from VA supported IP camera.

  • Page 18: Quick Copy

    PixelMASTER GXi Series NVR User’s Manual 3.1.5 QUICK COPY If you click following icon, instant Backup menu will be pop up. You can save the data 10 minutes from the current time. 3.1.6 SEARCH To search a particular section of recorded footage, press the SEARCH button. To protect unauthorized viewing of footage, only authorized users can playback footage.

  • Page 19: Ptz

    PixelMASTER GXi Series NVR User’s Manual 3.1.8 PTZ You can move to the PTZ control mode. When the display mode is split screen, the PTZ control panel will be opened for the selected camera which is previously highlighted by mouse click. If there is no highlighted camera, the PTZ control panel is opened for controlling the camera 1.
  • Page 20 PixelMASTER GXi Series NVR User’s Manual : You can move Zoom area with arrow buttons. : If you press this button, zoom ratio will be changed for 1x to x5 [Zoom by using Mouse] At full screen mode, you can select the area to zoom in by clicking left button of Mouse. (Drag), Clicking on the zoomed screen, the display returns to the original full screen mode.

  • Page 21: Log List

    PixelMASTER GXi Series NVR User’s Manual 3.1.10 LOG LIST You can view the log list by selecting log list button in Tool bar. 1 : Display number from currently triggered ( Max 10,000 list can be recorded) 2 : Date / Time 3 : Log list Items listed in log list.

  • Page 22: Search & Playback

    PixelMASTER GXi Series NVR User’s Manual 4. SEARCH & PLAYBACK TIME / CALENDAR SEARCH You can search the recorded data by a calendar and timeline for quick access to recorded footage. 1 : Search Mode : You can select the search mode. ...
  • Page 23 PixelMASTER GXi Series NVR User’s Manual In full screen mode, playback control can be performed by control box. In single screen mode, digital zoom function will be available. : Return to Search menu. : Close playback screen and return to live screen 5: PLAY CONTROL: Playback speed and direction control.

  • Page 24: Panorama Search

    PixelMASTER GXi Series NVR User’s Manual PANORAMA SEARCH Panorama search supports hour/minute/second based search in 16ch view mode. 4.2.1 BASIC OPERATION 1) Select Channel form dropdown list to do panorama search. 2) Select the date of Calendar, thumbnail image by hour will be shown in display window. (It will be shown from first recorded data in selected date.) 3) Select one of the thumbnail images when you want to search by minute.

  • Page 25: Event Search

    PixelMASTER GXi Series NVR User’s Manual 4.3 EVENT SEARCH You can search recording data by Event. When you selected date of calendar, event search will be started automatically in the specified day. Event list shows 20 event per page from the latest event, maximum 25page can be searched. ( 500 event) Event list exceed 500 events, please re-search by adjusting event search period by time slider bar.
  • Page 26 PixelMASTER GXi Series NVR User’s Manual VCA function supported only for PixelPro GXi camera with auto connection mode.  STATUS (VA only) : Display VA event’s “begin” or “end”.  ZONE (VA only) : Display zone number of VA event. ...

  • Page 27: Copy

    PixelMASTER GXi Series NVR User’s Manual COPY FROM: Specify the stat time to copy. TO: Specify the end time to copy. TAG NAME: Please enter Tag name. Tag name will be used to Folder and File name. AVI format : “TAG”_”CH” Folder File Name : “TAG”_”CH”_”Resolution”_”FrameRate”_”StartTime”_”EndTime”.avi (Example) : \test11_CH1\ test11_CH1_1920_1080_15fps_140512_130103_140512_130500...

  • Page 28: Quick Menu

    PixelMASTER GXi Series NVR User’s Manual 5. QUICK MENU If you are using USB mouse to control the NVR, pressing the right button of mouse will bring up the Quick Menu. Here you can use display pause, pan tilt control, zoom control, IP camera scan. FREEZE ON : If you press Freeze button, all screen will be stopped.
  • Page 29 PixelMASTER GXi Series NVR User’s Manual PTZ: Selecting PTZ will bring up PTZ control screen. PTZ can only be controlled by an authorized user. PTZ mode will be activated in the channel you selected by mouse. ZOOM : This execute digital zoom control screen. Zoom mode will be activated in the channel you selected by mouse.
  • Page 30 PixelMASTER GXi Series NVR User’s Manual Please refer to IP cam menu for more details. ALARM RESET: To turn off the buzzer and relay output when “until key” selected in event menu. ONE CLICK FOCUS: execute the focus adjustment on MFZ lens model. 05-2014-A...

  • Page 31: How To Configure

    PixelMASTER GXi Series NVR User’s Manual 6. HOW TO CONFIGURE To view the setup menu in each configuration items, press menu button of toolbar. Following screen will be displayed. CONFIGURING CAMERA To set-up the various camera options. 6.1.1 TITLE TITLE: Up to 10 characters could be set by using the virtual keyboard. 05-2014-A...

  • Page 32: Adjust

    PixelMASTER GXi Series NVR User’s Manual 6.1.2 ADJUST You can adjust the video attributes such as ‘BRIGHTNESS’, ‘CONTRAST’, ‘SHARPNESS’ and ‘SATURATION’ by clicking one of the values for the required channel. This feature is only available for the camera connected by “auto mode”. BRIGHTNESS: configure the camera brightness.

  • Page 33: Ptz

    PixelMASTER GXi Series NVR User’s Manual 6.1.3 PTZ For controlling PTZ by RS-485 port, you need to specify PTZ protocol. ADDRESS: The unique ID of the PTZ device. PROTOCOL: The protocol of the PTZ device. BAUDRATE: The baud rate of the PTZ device. 6.1.4 CAM PORT This is menu to set up IP camera connected peer to peer port.
  • Page 34 PixelMASTER GXi Series NVR User’s Manual TYPE: You can select connection type AUTO/MANUAL/RTSP  AUTO: Select this mode for peer to peer connection with built-in HUB The Default IP address will be allocated 192.168.172.101 ~ 104 (4ch) / 192.168.172.101 ~ 108 ...
  • Page 35 PixelMASTER GXi Series NVR User’s Manual  IP ADDRESS (in manual mode): Input IP address of IP camera. Default(When used to Ethernet port): 4ch 192.168.0.201 ~ 204 / 8& 16ch 192.168.0.201 ~ 208  Default(When used to local port): 4ch 192.168.172.101 ~ 104 / 8 & 16ch 192.168.172.101 ~ 108 ...

  • Page 36: Virtual Port

    PixelMASTER GXi Series NVR User’s Manual SCAN: User can scan IP camera currently installed to Local/Ethernet network.  MODEL: The model of searched IP camera.  MAC: MAC address of IP camera.  IP: IP address of IP camera.  CH: The channel information which assigned to NVR.

  • Page 37: Configuring Display

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING DISPLAY To set-up the various display options. 6.2.1 OSD Configure camera OSD parameters. TOOLBAR DISPLAY TIME: set tool bar display time from ALWAYS / 5 SEC /10 SEC / 15 SEC / 20 SEC / 30 SEC / 1 MIN. LIVE TIME DISPLAY: Select the live time display On / Off.

  • Page 38: Monitor

    PixelMASTER GXi Series NVR User’s Manual 6.2.2 MONITOR NVR’s resolution / screen switch can be changed here. ALARM POP-UP MODE: When you set ON, an alarm input will cause the associated channel to display full screen. ALARM POP-UP DWELL: Determines how long the full screen popup is displayed after an alarm event.

  • Page 39: Sequence

    PixelMASTER GXi Series NVR User’s Manual 6.2.3 SEQUENCE Screen auto switch time can be configured here. SEQUENCE DWELL: Set sequence interval time for main monitor (5/10/15/20/30/40/60 seconds). SPOT SEQUENCE DWELL: Set sequence interval time for spot monitor (5/10/15/20/30/40/60 seconds). SPOT SEQUENCE MODE: You can select the sequence mode of spot monitor. ...

  • Page 40: Configuring Disk

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING DISK Recording device related configuration and operation can be executed here 6.3.1 SETUP You can configure the setting of DISK. OVERWRITE: If you select “ON”, overwrite mode will be activated. RECORDING TIME LIMIT: The recording data will be deleted after a specific time (12hr –...
  • Page 41 PixelMASTER GXi Series NVR User’s Manual  GOOD: It shows current HDD condition is good.  BAD: It shows current HDD condition is bad. HDD’s S.M.A.R.T information would not be supported depending on HDD. RAID: You can configure the RAID-5 group. Minimum three HDDs are required.

  • Page 42: Format

    PixelMASTER GXi Series NVR User’s Manual 6.3.2 FORMAT HDD TYPE: You can select HDD Type (RECORD or MIRRORING) to format. FORMAT: Click this button to execute format HDDs. Formatting time would be different depending on recorded capacity in HDD. Device: Select USB processing NVR support format function of USB memory stick and external hard drive FORMAT: Click this button to execute format USB Device..

  • Page 43: Configuring System

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING SYSTEM To set-up the various system options, highlight SYSTEM and press ENTER. 6.4.1 DATE TIME DATE&TIME: Allows the operator to set or modify the current date & time. After changing date / time, press ( ) button to apply changes.
  • Page 44 PixelMASTER GXi Series NVR User’s Manual SYSTEM INFORMATION: Select INFO to display. Following window will be displayed.  F/W VERSION: The firmware version of the NVR.  H/W VERSION: The hardware version of the NVR.  UI VERSION: The UI version of the NVR. ...

  • Page 45: Sound

    PixelMASTER GXi Series NVR User’s Manual F/W UPGRADE: Use this button to upgrade Firmware. fiCopy new Firmware files in “dvr” folder of USB memory stick. Connect USB memory to NVR, then click F/W UPGRADE button. FACTORY DEFAULT: Set all settings to factory default. SYSTEM DATA: You can save/load System settings to/from USB memory stick.

  • Page 46: Configuring Event / Sensor

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING EVENT / SENSOR You can configure Event activation like Sensor Input / Sensor Output / Buzzer Out / E-Mail / Push Alarm. 6.5.1 SENSOR INPUT You can configure Alarm input . OPERATION: You can configure Enable/Disable Sensor input. TYPE: If the operation is enabled, you can select sensor type.

  • Page 47: Buzzer Output Setup

    PixelMASTER GXi Series NVR User’s Manual OPERATION: You can configure Enable/Disable Relay output. MODE: You can configure operation type of Relay output.  TRANSPARENT: Keep Relay output until event triggering stopped.  LATCHED: Keep relay output as long as duration specified. DURATION: If the alarm output mode is configured as Latched.

  • Page 48: E-Mail Setup

    PixelMASTER GXi Series NVR User’s Manual DURATION: You can configure duration for buzzer output at latched mode. SENSOR: When sensor input, buzzer output will be activated. VIDEO LOSS: When video loss occurred, buzzer output will be activated. MOTION: When motion triggered, buzzer output will be activated. 6.5.4 E-MAIL SETUP You can confiture E-mail notification when event triggered like follows.

  • Page 49: Configuring User

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING USER To set-up the User Authority options. 6.6.1 USER REGISTER By default, the NVR is configured with a USER ID of ADMIN belonging to the ADMIN group and with a password of 1234. Using this, max 10 new user accounts can be registered and configure authority separately.

  • Page 50: User Authority

    PixelMASTER GXi Series NVR User’s Manual E-MAIL: Enter the user’s email address if email notifications are required. E-MAIL SEND: Enable or disable email notification for the particular user. NOTE) Maximum 10 users can be registered. NOTE) default ADMIN user could not be deleted. 6.6.2 USER AUTHORITY User authority (except ADMIN) can be selected for each user.

  • Page 51: Configuring Record

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING RECORD To set-up the various recording options, highlight RECORD. 6.7.1 MAIN STREAM Main stream configuration is set up here. The stream configuration can be setup in only “AUTO” mode (peer to peer mode). In case, “Manual”/”RTSP”...

  • Page 52: Sub Stream

    PixelMASTER GXi Series NVR User’s Manual 6.7.2 SUB STREAM Sub stream configuration is set up here. The stream configuration can be setup in only “AUTO” mode (peer to peer mode). In case, “Manual”/”RTSP” mode, stream configuration need to be setup in camera interface directly by PC.

  • Page 53: Schedule

    PixelMASTER GXi Series NVR User’s Manual 6.7.3 SCHEDULE You can configure schedule recording mode as Daily / Weekly. Daily: set up one schedule and apply to every day. Weekly: set up 7 schedules from Monday to Sunday, and use it for every week. Select daily or weekly in “OPTION”...

  • Page 54: Option

    PixelMASTER GXi Series NVR User’s Manual 6.7.4 OPTION SCHEDULE MODE: Either DAILY (one schedule will apply to every day of the week) or WEEKLY (each day of the week has its own schedule).  DAYLY: You can configure the recording type by a hour and by a channel. This mode is for the demand that all days have the same recording schedule regardless of the day of the week.
  • Page 55 PixelMASTER GXi Series NVR User’s Manual Mirroring: You can enable mirroring recording mode or not.  ON: Select mirroring record and record as per mirroring way. EVENT: Just event data will be recorded to mirroring HDD.  ALL: Same data will be recorded to mirroring HDD same as current recording data. ...

  • Page 56: Configuring Network

    PixelMASTER GXi Series NVR User’s Manual CONFIGURING NETWORK To set-up the Network options, highlight NETWORK and press ENTER. Configure all the menu of network. 6.8.1 ETHERNET PORT IP set up menu for Ethernet port. It require to setup when connect IP cameras on Ethernet port or you access NVR from client SW.

  • Page 57: Local Port

    PixelMASTER GXi Series NVR User’s Manual 6.8.2 LOCAL PORT IP setup menu for Local port. In AUTO mode, NVR will assign IP address based on local port setting to IP camera automatically. In Manual/RTSP mode, you need to assign same segment of IP address to the camera manually.

  • Page 58: E-Mail

    PixelMASTER GXi Series NVR User’s Manual  AUTO DDNS NAME: DDNS name registered on the server is displayed. 6.8.4 E-MAIL USE DEFAULT SERVER: Selects ON or OFF. If you make Default sever as ON, mail will be sent by default mail server displayed. SERVER: The SMTP outbound email server that should be used to send email notifications.

  • Page 59: Remote

    PixelMASTER GXi Series NVR User’s Manual 7. REMOTE WEB SERVER NVR prepares the web server internally. This server consists of two services. One is for the remote configuration of NVR setup and the other is for the client viewer based on the Active-X. Using the remote configuration, you can configure all feature sets of NVR.
  • Page 60 PixelMASTER GXi Series NVR User’s Manual [The initial screen of Web Server] 1: Enter the IP address of your NVR. If you don’t use the default port number of HTTP, 80, you may add the port number following the IP address. Ex. http://192.168.123.63:8080 2: Input the administrator’s password beside of the ‘ADMIN PASSWORD’.

  • Page 61: Web Configuration Page

    PixelMASTER GXi Series NVR User’s Manual 7.1.2 WEB CONFIGURATION PAGE In the web configuration page, you can set the NVR operations remotely. Tested Web Browser List  Microsoft Internet Explorer○  Mozilla Firefox○  Google Chrome Browser○  Opera Browser○ ...

  • Page 62: Web Viewer (Active-X)

    PixelMASTER GXi Series NVR User’s Manual ‘5.HOW TO For the detail description of the NVR configuration, please refer the CONFIGURE’ section of this manual. Clicking the following link will guide you to the proper section which explains each setup. CAMERA DISPLAY SYSTEM USER...
  • Page 63 PixelMASTER GXi Series NVR User’s Manual ‘Searching’ shows the results such as below. Click the ‘ADD TO CHROME’ and then you can see the IE symbol on the right side of URL Bar There are two ways to execute the ‘Web Viewer’ from the Chrome. 1.
  • Page 64 PixelMASTER GXi Series NVR User’s Manual Select the ‘Open Link in IE TAB’. ActiveX First execution will install the ActiveX plug-in. And the application will be executed if installed already. 7.1.3.2 Initial Screen of Web Viewer Executing the ‘Web Viewer’ opens the application separated from the web browser and show the login window such as below picture.
  • Page 65 PixelMASTER GXi Series NVR User’s Manual 7.1.3.4 Live Preview After login, the live preview screen will be shown as below. Features User log-in/out feature (CONNECT) Monitoring the live preview Snapshot and save the preview video as JPEG (Admin Only) Control the resolution and quality for transferred video stream directly The yellow rectangle around video shows the currently selected camera 1 : IP address of connected NVR 2 : display split mode selection...
  • Page 66 PixelMASTER GXi Series NVR User’s Manual 7.1.3.5 JPEG Snapshot/ PTZ control / Video Configuration /Live Audio In the Web Viewer, you can save the video as JPEG file, control the PTZ of camera and hear the audio from the NVR. And especially, you can configure the transferred video directly from the viewer.
  • Page 67 PixelMASTER GXi Series NVR User’s Manual 7.1.3.6 Search & Playback Entering to the search & playback window or Returning to the live preview Features User log-in/out feature (CONNECT) Switching between the live preview and the search & playback Search & Playback Copy the recordings in the NVR to the PC remotely 1: Show the IP address of NVR currently connected 2: Split mode selection.
  • Page 68 PixelMASTER GXi Series NVR User’s Manual  : Pause  : Forward Normal Speed  : Forward Slow  : Forward Fast Steps for fast playback : x2, x4, x8, x16,x30, x60, x120 Steps for slow playback : 1/2, 1/4, 1/8, 1/16, 1/30, 1/60, 1/120 4: Fast Playback Speed &...
  • Page 69 PixelMASTER GXi Series NVR User’s Manual  : select the search mode to ‘Time Search’.  Yellow colored cell indicates the currently selected hour and minute.  Green colored cell means that there is the recording data by the continuous recording.
  • Page 70 PixelMASTER GXi Series NVR User’s Manual  : Select the search mode to ‘EVENT Search’.  Event Type(Search Condition) All: For all kinds of recording event  Sensor: sensor input event  Video Loss: lost video event   Motion Detection : motion detection event ...

  • Page 71: Android Viewer / Ios Viewer

    PixelMASTER GXi Series NVR User’s Manual Android Viewer / iOS Viewer PocketViewer is the name of smart phone viewer for Android iPocketViewer is the name of smart phone viewer for iOS. And you can also access to NVR system through 3G/4G phone or Wi-Fi connection. Main feature Live View Full-Screen...
  • Page 72 PixelMASTER GXi Series NVR User’s Manual If you press Quick Connect button, the above image will be displayed. NVR Address : You need to input IP Address Port Number : You need to input NVR port number that you configured at Network menu at NVR.
  • Page 73 PixelMASTER GXi Series NVR User’s Manual 7.2.1.3 How to add NVR to the List If you press New button, following window will be displayed. NVR Name : You can name newly added NVR to the List . NVR IP/DDNS : You can input IP address and DDNS info of NVR. Port Number : You can input NVR port number.

  • Page 74: Ddns Server

    PixelMASTER GXi Series NVR User’s Manual DDNS SERVER You can get Domain Name Service through DDNS server. 7.3.1 HOW TO REGISTER You need to input at URL in Web Brower. http://dynamicmv.com You can view following image from DDNS server. ANDROID VIEWER: You can download Android Viewer ( iPocketViewer) . Android Viewer : Android Viewer DDNS SERVER: If you press DDNS server button, you will be moved to DDNS server page.

  • Page 75: Input Nvr Information

    PixelMASTER GXi Series NVR User’s Manual 7.3.3 Input NVR information. You need to register domain name to get the service and input MAC address into DDNS server. 1 : List number of registered NVR 2 : Mac address of registered NVR 3 : Domain name of registered NVR.

  • Page 76: Dvr Manager

    PixelMASTER GXi Series NVR User’s Manual DVR MANAGER DVR MANAGER is a ‘Remote Client DVR Viewer’ which can provide the functions such as ‘Monitoring the live video’, ‘Search & Playback for the Recorded Video in NVR’ and ‘Download the Recorded Video in NVR(Remote COPY). The following table shows the PC requirement for this application S/W.

  • Page 77: Execution

    PixelMASTER GXi Series NVR User’s Manual : Complete Message Window 7.4.2 EXECUTION The shortcut of ‘DVR Manager’ is created after the successful installation. Clicking this icon executes the DVR Manager. : Shortcut and icon of DVR Manager 7.4.3 LIVE VIDEO MONITORING The initial window of DVR Manager is composed of the picture below.

  • Page 78: Connection Manager

    PixelMASTER GXi Series NVR User’s Manual 3 :CONFIG :  FOLDER SELECT: Choose or make the folder for the data which is copied out from the NVR remotely.  SAVE: Apply and save the current modification. CLOSE: exit the ‘Config’ pop-up. ...
  • Page 79 PixelMASTER GXi Series NVR User’s Manual DVR Name: The name which you give to the NVR which has the following connection information. DVR Address : specify the IP address of the NVR DVR Port: the port number for NVR connection. The value should be same as the one specified port number of your NVR.

  • Page 80: Live Video Window

    PixelMASTER GXi Series NVR User’s Manual Add: add new NVR into the NVR list. Edit: edit the connection information of the selected NVR. Remove: remove the selected NVR from the NVR list. Close : close the CONNECTION MANANGER 7.4.5 LIVE VIDEO WINDOW The transferred live camera video are monitored in this window, Features of LIVE VIDEO WINDOW Monitoring live camera video...
  • Page 81 PixelMASTER GXi Series NVR User’s Manual 7.4.5.2 Swap Camera Position You can swap the display location of the selected two cameras by drag and drop. The swapped camera position will go back to the original location in case that the NVR manager restarts or the connection is re-established.
  • Page 82 PixelMASTER GXi Series NVR User’s Manual : Save the current video of the selected channel with the yellow border into the PC as a JPEG file. : Open the PTZ control panel, which controls the PTZ camera of the selected channel. 1: Camera Channel number which is currently selected.
  • Page 83 PixelMASTER GXi Series NVR User’s Manual : Open the ‘Network Stream Config’ panel where you can choose the resolution and the quality for the transferred video. The changes will affect the all channels. 1: Network Stream: You can select the network stream of camera Default Quality: ‘SUB STREAM 2: Apply of modification (SET) 3: Close the config window...

  • Page 84: Player

    PixelMASTER GXi Series NVR User’s Manual  CONNECT: Connect the NVR selected  DISCONNECT: Dis-connect the NVR Manager from the NVR  RUN PLAYER: Execute the Player for the remote search & playback.  DVR WEB MENU: link the nvr web menu. 7.4.5.6 NVR Information This panel shows some information of NVR which is currently highlighted from the NVR List.
  • Page 85 PixelMASTER GXi Series NVR User’s Manual 7.4.6.2 Log In : Enter the USER name of NVR registered in the NVR : Enter the password for the selected user. The user authority and allowed functions, live preview, search & playback, PTZ control and etc., are controlled by the setting USER AUTHORITY setting of NVR setup...
  • Page 86 PixelMASTER GXi Series NVR User’s Manual (Admin Only) Control the resolution and quality for transferred video stream directly The yellow rectangle around video shows the currently selected camera 1: IP of NVR connected remotely 2: display split mode selection  : Single camera view ...
  • Page 87 PixelMASTER GXi Series NVR User’s Manual 5: Date & Time of Camera transferred from the NVR 6 : Channel Title and the resolution of the transferred video For the detail about the JPEG Snapshot/PTZ Control/Video Configuration, refer to the same feature of Web Viewer.
  • Page 88 PixelMASTER GXi Series NVR User’s Manual 7.4.6.4 Search & Playback Entering to the search & playback window or Returning to the live preview Features User log-in/out feature (RECONNECT) Switching between the live preview and the search & playback Search & Playback Copy the recordings in the NVR to the PC remotely 1: Application title 2: Split mode selection.
  • Page 89 PixelMASTER GXi Series NVR User’s Manual  : Pause  : Forward Normal Speed  : Forward Slow  : Forward Fast Steps for fast playback : x2, x4, x8, x16,x30, x60, x120 Steps for slow playback : 1/2, 1/4, 1/8, 1/16, 1/30, 1/60, 1/120 4: Fast Playback Speed &...
  • Page 90 PixelMASTER GXi Series NVR User’s Manual  Channel: Choose the channel required to be copied  From: The start time of the recording data to be copied  To: The end time of the recording data to be copied  Copy Start: executing the copy operation TAG name and Channel have to be defined to proceeding the copy.
  • Page 91 PixelMASTER GXi Series NVR User’s Manual  : Right click on the minute bar will show the pop-up menu such as the left pictures.  : Taking the ‘COPY START TIME’ from the selected time cell and input it into the ‘From’ of COPY control panel. ...

  • Page 92: File Player

    PixelMASTER GXi Series NVR User’s Manual Sensor: sensor input event  Video Loss: lost video event   Motion Detection : motion detection event  CH ALL: Searching for all channels  CH1/CH2/CH3/CH4: choosing the channel to be searched  Research: execute the event search again 10: Time selection &...
  • Page 93 PixelMASTER GXi Series NVR User’s Manual [Auto generation] You can display the video copied as NVR from. 1: FILE SELECT: You can select NVR form file to display. 2: FULL SCREEN: Full screen video view. Press ‘ESC’ to return to the window 3: Split mode selection.
  • Page 94 PixelMASTER GXi Series NVR User’s Manual  : Forward Fast Steps for fast playback : x2, x4, x8, x16,x30, x60, x120 Steps for slow playback : 1/2, 1/4, 1/8, 1/16, 1/30, 1/60, 1/120 5: Fast Playback Speed & Direction Control Bar ...

  • Page 95: Appendix A

    PixelMASTER GXi Series NVR User’s Manual 8. Appendix A Items showing in Log List.  Power ON/OFF  Backup Start  Disk Format  Factory Default  Camera Menu Change  PTZ Menu Change  OSD Menu Change  Monitor Menu Change ...
  • Page 96 PixelMASTER GXi Series NVR User’s Manual  HDD 1(1 ~ 5) Fail For Read  Network Connected  Time Adjust  Network Disconnected  NVR Watchdog Reset  Menu Data Backup Succeeded  Menu Data Load Succeeded  Menu Data Backup Failed ...

This manual is also suitable for:

Nr1-8f26Nr1-16f26Nr1-4f23sNr1-8f26sNr1-16f26s

Table of Contents