Connecting The Swa-8500S To A Soundbar; Connect The Wireless Receiver Module To 2 Surround Speakers; Check The Standby Status After Plugging Into An Electrical Outlet - Samsung SWA-8500S User Manual

Connecting the SWA-8500S to a Soundbar

1. Connect the Wireless Receiver Module to 2 Surround Speakers

Use the speaker cables to connect two surround sound speakers to the Wireless Receiver Module.
• The speaker cables are color coded.
• When connecting the speaker cables to the Wireless Receiver Module, follow these steps:
1. Insert the grey plug into the grey jack on the Wireless Receiver.
2. Insert the blue plug into the blue jack on the Wireless Receiver.
• When connecting the speaker cables to the surround speakers, follow these steps:
1. Match the speaker cable connected to the grey jack to the speaker with the grey label.
2. Match the speaker cable connected to the blue jack to the speaker with the blue label.
3. Insert the red and black colored ends of each speaker cable into the red and black jacks of
the appropriate speakers.
• The labels are on the backs of the speakers.

2. Check the standby status after plugging into an electrical outlet

Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless
Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the
Wireless Receiver Module blinks. If the LED does not blink, refer to step 7 on page 9.
SURROUND-LEFT
SURROUND-LEFT
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET
POWER
POWER
L R
SURROUND-RIGHT
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3
ID SET
L R
SURROUND-RIGHT
POWER
ID SET
STANDBY
STANDBY
LINK
LINK
Blue blinking
ENG - 7