Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts and rubber grommets on the display bezel, place the
speakers on the display bezel.
2
Route the speaker cable through the routing guides on the display bezel and the
display-panel base.
3
Connect the speaker cable to the system board.
Post-requisites
1
Replace the
system-board
2
Replace the
back
3
Follow the procedure in step 4 in
4
Replace the stand.
computer. After working inside your computer, follow
After working inside your
shield.
cover.
"Replacing the optical
computer. For more safety best
www.dell.com/
drive".
Before
65