Table of Contents
Summary of Contents for X-FLOC FFB2000-Pro
-
Page 1: Operating Instructions
Operating Instructions Radio Remote Control FFB2000-Pro Original Operating Instructions Version 1.0-1.4 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com... -
Page 2: Short Instructions
Controls switches off. The controls automatical- ly go into "power off" mode after 30 minutes when not in use. 2× Page 2 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com... -
Page 3: Machine Operation
The controls' reaction speed can be set with parameter 6. Deactivation of dynamic pressure regu- The yellow air volume scale stops flashing. lation. Page 3 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com... - Page 4 10 = 100% Firmware version display. The firmware version is displayed on the air volume scale: 1.4. Page 4 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com...
-
Page 5: Parameter Assignment
2: Control signal air 0-10V (Ex.: EM5xx, EM4xx, EM3xx, M03, M95K, M99-DS-Pro) 4: Control signal air 0-15V (Ex.: M95A-M95H) Reserved Test mode 1-10 Page 5 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com... -
Page 6: Basic Settings
Active cable connection is confirmed with a short beep. Page 6 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com... -
Page 7: Important Battery Information
Exception: For controls delivered until 07/2012 only batteries with a capacity between 900mAh and 1000mAh must be used. Only use the nickel metal hydride (NiMH) AAA (micro) rechargeable batteries approved by X-Floc. The limit- ing values of the batteries follow. -
Page 8: Technical Data
Moisture content 15% to 95% rel., no condensation Protection class IP 40 Range With no interference, >100 m Page 8 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com... - Page 9 Check battery capacity: Press „+“ and „-“ button at material block simultaneously: Capacity 1=10%... 10=100%. Capacity < 20%: charging recommended. Store control maximum 3 weeks without charging. Page 9 of 9 X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße 12 · 71272 Renningen · Germany Phone +49-7159-80470-30 · Fax -40 | info@x-floc.com · www.x-floc.com...
Need help?
Do you have a question about the FFB2000-Pro and is the answer not in the manual?
Questions and answers