Do you have a question about the BC-100 and is the answer not in the manual?
Questions and answers
Eva Ingólfsdóttir
February 16, 2025
Hi I have own Alecto clock for my kids for 7 years but last week the alarm clock that I did not know was a available started to ring and we dont want a alarm clock. I cant see how I take the alarm clock off, only thing I could think of was to reset the clock, is there some other way? Also if I want to one day use the alarm, how do I turn it on?
1 comments:
Mr. Anderson
May 14, 2025
To turn off the alarm on the Alecto BC-100 clock, press any button when the alarm sounds. If you do not press any button, the alarm sound will stop automatically after 1 minute.
To turn the alarm back on, make sure the hour or minute digits are flashing, then press the button until the alarm icon appears. This means the alarm is active again.
Page 1
USER MANUAL SLEEP TRAINER CLOCK with ALARM BC-100 NIGHT LIGHT...
Page 2
GENERAL: Highly suitable for improving the sleeping rhythm of your toddler. The display shows two icons and uses a backlight to tell your child whether it’s time to get up or to stay in bed a little longer. You may program the sleep time and the wake-up time, e.g.
Page 3
It takes approx. 1.5 hours to fully charge the battery (depending on the used adaptor). The USB port is only suitable for charging the BC-100. While charging, the red LED indicator will remain lit. The LED indicator turns to green as soon as the battery is fully charged.
Page 4
DAY TIME SETUP (start of the day – white light): Make sure to activate the “Day time ( )” display ( ). Press see Display Setup and hold the button for 2 seconds until the hour display starts flashing. Use the “+” and “-” buttons to set the correct hour. Press the button to continue to the minute setting.
Page 5
TO ENABLE/DISABLE: The BC-100 may be turned on and off by pressing the button. When switched off, the BC-100 emits no light and has no display. When enabled again, the BC-100 will switch on with display and backlighting. RESET: You may reset the BC-100 to the default factory settings. Simultaneously press the buttons until CLR appears in the display.
Page 6
WHEN NOT USED FOR A LONG PERIOD OF TIME: When not using the BC-100 for a long period of time, please fully charge the battery every 3 months to extend the lifespan of the Lithium battery. SPECIFICATIONS: Power: Built-in rechargeable...
Need help?
Do you have a question about the BC-100 and is the answer not in the manual?
Questions and answers
Hi I have own Alecto clock for my kids for 7 years but last week the alarm clock that I did not know was a available started to ring and we dont want a alarm clock. I cant see how I take the alarm clock off, only thing I could think of was to reset the clock, is there some other way? Also if I want to one day use the alarm, how do I turn it on?
To turn off the alarm on the Alecto BC-100 clock, press any button when the alarm sounds. If you do not press any button, the alarm sound will stop automatically after 1 minute.
To turn the alarm back on, make sure the hour or minute digits are flashing, then press the button until the alarm icon appears. This means the alarm is active again.
This answer is automatically generated