Citizen Auto-Cutter CL-S6621 User Manual page 5

z Avoid the following conditions to ensure proper operation of the
auto-cutter.
„ The cutting blade can be very dangerous. Also, this can cause
damage.
„ Room temperature is less than 5°C or more than 40°C.
„ Humidity is less than 30% or more than 80%.
„ Dusty
„ Direct sunlight
„ Chemicals
„ Vibrations or impacts
z When cutting media (paper)
„ Do not operate auto-cutter without loading paper. This can cause
damage to the cutter.
„ Use the standard media (paper). Otherwise, problems such as
paper jams may occur.
„ Remove any dust or particles from the paper guide and path
periodically.
{ When auto-cutter is cleaned, turn off the power to the printer
and remove the power cord from the outlet beforehand.
{ Clean the main body of the auto-cutter with a soft cloth that
is soaked in a thinned neutral detergent. Do not use volatile
solvent such as benzene and thinner, which can cause
discoloration.
{ When the cutter blade becomes dirty, contact your supplier
or a service representative.
CAUTION
-5-