Devices - Philips 40PFL8605 User Manual

6.5 Devices

HDMI connections
• The HDMI-HDCP procedure might take a few seconds before the
picture from a device appears.
• If the TV does not recognise the device and there is no picture, try
switching from one device to another and back again to restart the
HDCP procedure.
• If sound interruptions occur persistently, see the user manual of the
device to check the output settings. If that does not help, connect an
additional audio cable.
• If a DVI to HDMI adaptor is used, check that an additional audio
connection is in place to complete the DVI connection.
EasyLink HDMI-CEC
• Check if the connected device supports the HDMI-CEC standard
and is properly set up. Read the user manual that comes with the
device.
• Check if the HDMI cable is properly connected.
• Check if EasyLink on the TV and device is switched on.
• Make sure that the System audio control in your HDMI-CEC audio
devices is properly set up. Read the user manual that comes with
your audio device.
PC display
• The refresh rate of a PC connected to the TV with VGA or DVI
to HDMI adapter should set to 60Hz.
• Check that the correct resolution mode is selected on your PC.
See the list in Help > Specifications > Display resolutions.
80 Troubleshooting / Devices