Advertisement
REMINDER
CALL 1-888-755-6750
BEFORE RETURNING TO STORE.
PACKAGE CONTENTS
Part
Floating Attachment Assembly
A
B
Trumpet Nozzle
C
Single Tier Nozzle
D
E
F
G
Pump with cord for LED light
H
I
Ground Anchor
G
I
WARNINGS AND CAUTIONS
WARNING
•
Risk of electrical shock. This fountain is supplied with a grounding conductor and grounding–type
attachment plug for pump. To reduce the risk of electric shock, be certain that it is connected only to a
properly grounded, grounding- type receptacle.
•
Do not exceed the voltage shown on the pump and transformer.
•
Always disconnect fountain from the power source before beginning any maintenance or work on the
pump.
•
Inspect cord for damage before installation and/or maintenance. Replace the entire fountain assembly
if damage is found.
•
Do not remove the grounding pin from the power cord plug.
•
Risk of electrical shock – This fountain has not been investigated for use in swimming pool or marine
areas.
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
½ HP Floating Fountain with Lights
Description
with LED lights
3 Tier Nozzle
Transformer
Sensor
Tether Line
H
I
Questions, problems, missing parts? Before returning
to your retailer, call our customer service department at
1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at customercare@thepondboss.net. Or visit our
website www.thepondboss.net.
Quantity
1
1
1
1
1
1
1
A
1
3
I
ITEM #PROFTN51003L
B
C
E
D
F
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pond Boss PROFTN51003L
Summary of Contents for Pond Boss PROFTN51003L
- Page 1 ½ HP Floating Fountain with Lights ITEM #PROFTN51003L Questions, problems, missing parts? Before returning REMINDER to your retailer, call our customer service department at CALL 1-888-755-6750 1-888-755-6750, 8 a.m.-6 p.m., EST, Monday-Friday, or BEFORE RETURNING TO STORE. email us at customercare@thepondboss.net. Or visit our website www.thepondboss.net.
- Page 2 CAUTION • This fountain has been evaluated for use with fresh water only. • Use a proper power source as indicated on the pump and transformer label. • Keep the cord away from high temperatures or other heat sources. • Do not let the fountain pump run dry.
- Page 3 4. Unwind power cord and connect another side of the cord for LED light to the sensor by pushing the plug into the sensor Sensor socket until it is firmly seated. Hand tighten the nut from the plug to the socket. Fig. 4 Plug from Cord Fig.
- Page 4 CARE AND MAINTENANCE • Regular cleaning of the fountain may be necessary depending upon the environment in which it is operated. Clean the fountain when a drop in visual performance is detected. • Before cleaning, always disconnect the pump and transformer from the power source. •...
- Page 5 REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-888-755-6750, 8 a.m.-6 p.m., EST,Monday- Friday, or email us at customercare@thepondboss.net. Part Description Trumpet Nozzle Single Tier Nozzle 3 Tier Nozzle Transformer Sensor Pump with cord for LED light Tether Line Ground Anchor Led light set...
- Page 6 This warranty period begins on the date of purchase by the original purchaser. Unless otherwise specified all pond boss® electrical products are warranted to the user against defective material and workmanship, under normal working conditions for 1 year from the date of purchase.
Need help?
Do you have a question about the PROFTN51003L and is the answer not in the manual?
Questions and answers