Advertisement

IMPORTANT, RETAIN FOR FUTURE
REFERENCE: READ CAREFULLY
Please keep with the Ventura Isofix Base
Ventura Isofix Base
Ventura Plus
Group 0+ - Birth to 13kgs (29lbs) Birth to approximately 9-12 months
Ventura Plus S
Group 0+ - Birth to 13kgs (29lbs) Birth to approximately 9-12 months

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VENTURA and is the answer not in the manual?

Questions and answers

Summary of Contents for Silver Cross VENTURA

  • Page 1 Group 0+ - Birth to 13kgs (29lbs) Birth to approximately 9-12 months Ventura Plus S Group 0+ - Birth to 13kgs (29lbs) Birth to approximately 9-12 months IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Please keep with the Ventura Isofix Base...
  • Page 2: Table Of Contents

    Warranty Notice POSSIBLE SEATING POSITIONS as long as the Ventura Isofix Base can be fitted in accordance with the user guide. In the direction of travel Against the direction of travel If the seat has Isofix points the...
  • Page 3: Important Safety Guide

    Important Safety Guide Do not fit the Ventura Isofix Base on a side or rear facing vehicle seat. Never use the Ventura Isofix Always store the Ventura Isofix Base in a safe, Base on a passenger seat dry place when it is not being used.
  • Page 4: Get To Know Your Ventura Isofix Base

    Support leg Support leg adjuster button Support leg pressure indicators(2) Red No to Green OK Support frame To remove the seat from the base use the chassis release handle on the back of the Ventura Plus and Plus S infant carrier.
  • Page 5: Installing The Ventura Isofix Base

    Installing the Ventura Isofix Base Make sure that your vehicle has Isofix anchor points and is in the Vehicle Application List supplied with the base. Locate the vehicle Isofix points. If this is a problem consult the Vehicle Manual. They are usually between the vehicle seat base and seat back.
  • Page 6 Isofix connection indicators are now showing green. click Push the Ventura Isofix Base towards the vehicle seat back and make sure that the base now fits firmly on the vehicle seat.
  • Page 7 Never place the front support leg of the Ventura Isofix Base on a floor storage compartment. The front support leg must be in full and firm contact with...
  • Page 8 Installing the Ventura Isofix Base (cont.) Lower the Ventura Plus or the Ventura Plus S Infant Carrier on to the Ventura Isofix Base and make sure that all 4 connection bars engage firmly and click into position on the base connection points.
  • Page 9: Detaching The Ventura Plus And Ventura Plus S From The Ventura Isofix Base

    Ventura Isofix Base Pull up the chassis release handle on the back of the infant carrier. The two indicators on the front of the Ventura Isofix Base will turn from green to red to indicate that the infant carrier has been detached...
  • Page 10: Looking After The Ventura Isofix Base

    Silver Cross Ventura Isofix Base. Approved under Regulation Number 44, Supplement 5, 04 series of amendments, Never use the Ventura Isofix Base on a pas- for general use in vehicles equipped with senger seat fitted with an airbag. It is very an Isofix fastening system.

Table of Contents