dr. Mercola SSB - 1000 Installation And Use Instructions

dr. Mercola SSB - 1000 Installation And Use Instructions

Soft spray bidet room temperature water

Advertisement

1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SSB - 1000 and is the answer not in the manual?

Questions and answers

Geoff Trace
May 12, 2025

What are the specs of the metal T connector to the toilet tank?

1 comments:
Mr. Anderson
May 20, 2025

The specifications of the metal T connector for the Dr. Mercola SSB-1000 toilet tank are not provided in the given context.

This answer is automatically generated

Geoff Trace
May 12, 2025

What are the specs of the bidet toilet tank adapter ?

1 comments:
Mr. Anderson
May 20, 2025

The Dr. Mercola SSB-1000 bidet toilet tank adapter is designed for use with room temperature water only. It includes a Metal T Connector that attaches to the water supply valve, a long flexible hose that connects from the T Connector to the bidet, and an optional flexible hose for connecting to the toilet tank. The adapter is installed by turning off the toilet's water supply, emptying the tank, disconnecting the original hose, installing the T Connector, and connecting the hoses accordingly.

This answer is automatically generated

Larry Kropf
February 14, 2025

How do I order parts ?

Wayne Barber
January 26, 2025

During a remodel, the metal T connector was discarded. Can I purchase a replacement?

David
January 16, 2025

Is there any way of repairing the faucet from leaking

Larry Kropf
February 14, 2025

How do I order parts

Summary of Contents for dr. Mercola SSB - 1000

  • Page 2 Model SSB-1000, is to be installed for use with room temperature water only. Procedures of Assembly Installation: Turn off the valve that supplies water to the toilet tank. (Fig.#1) Empty the toilet tank by flushing it. Remove the hose connecting the water supply valve with the toilet tank, (Fig.#2) Install the Metal T Connector (Part #2) to the connection on the water supply valve (Fig.
  • Page 3 Bidet Installation: Using a Flat Screwdriver, and a wrench if needed, remove the bolts and nuts to take off the toilet seat and cover (Fig. On each bolt hole, place a large Black Rubber Washer (Part #3)(Fig #8), and place the Bidet on top of the holes and washers (Fig #9), aligning the Sliding Seat Adjusters (Bidet Figure) with the holes.

Table of Contents