Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Salusfin Manuals
  4. Wireless Router
  5. SF-930EU
  6. User manual

Salusfin SF-930EU User Manual

Hide thumbs
1
Table Of Contents
2
3
4
5

Advertisement

Quick Links

Download this manual
http://52.208.104.45/
Gateway lite | SF-930EU
User Guide for Installation
1

Advertisement

loading

Related Manuals for Salusfin SF-930EU

Summary of Contents for Salusfin SF-930EU

  • Page 1 Gateway lite | SF-930EU User Guide for Installation...

  • Page 2: Table Of Contents

    Installing gateway – in case of a problem ..............5 Gateway Introduction This user guide will walk you through your Salusfin Gateway Lite set up. Wi-Fi specifications:  Your Wi-Fi router must support the 802.11N standard to install your Gateway Lite.

  • Page 3: Powering Up The Gateway

    Powering Up the Gateway Power up the gateway by connecting the power supply pin with the holder and gateway lite. Picture 1 shows the Gateway lite. Picture 2 -The power supply. Picture 3- the Holder. On powering, make sure the Gateway Lite flashes blue once to indicate that it is powered on.

  • Page 4: Wifi Configuration

    You will get installation confirmation (Picture 13) and network will disappear from the list of networks and the device you are using will seek for your home network again. Navigate in your browser to Salusfin Control Manager in address https://control.salusfin.com (Picture 13, 14) to continue installing components.

  • Page 5: Installing Gateway - In Case Of A Problem

    Installing gateway – in case of a problem In case the gateway LED is not lit at all, check that is in correct way in the holder. If the LED is RED on the Gateway lite it means that the network configuration failed. Start again by Unplugging the Gateway lite, press and hold the button while connecting it back to power.