Care Of Your Product - ONE CH116 Instruction Manual

Problem
LCD is blank
No Outdoor Temperature is
displayed
Temperature is incorrect
DCF time and date will not set or
update
Time is one or few hours off

CARE OF YOUR PRODUCT

1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat
or moisture.
2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a
cloth or protective material between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as
Benzine, thinner or similar materials can damage the surface of the unit. Make sure the unit is
unplugged before cleaning.
4. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadimium) batteries.
5. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries
to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the
compartment thoroughly and replace the batteries.
6. Do not open the inner back case or tamper with any components of this unit.
7. Do not plug in any other AC/DC adaptor with incorrect specifications or voltage.
Solution
1. Press RESET on the main unit.
2. Check if AC/DC adaptor or DC jack is loose or
unplugged.
1. Press and hold + / IN-OUT
2. Press and hold + / IN-OUT, then press RESET on the
outdoor sensor.
3. Observe if the Low Battery icon appears next to the
outdoor temperature. If yes, replace batteries in outdoor
sensor with fresh alkaline batteries.
4. No other interfering sources are being used (such as
computer monitors, TV sets, headphones, or speakers) in
the path of signal from the outdoor sensor. The signal
travels in a straight line, an electrical source near that
"line" may cause interference.
1. Press RESET on the main unit.
2. Make sure your main unit and the outdoor sensor is away
from sources of heat / cold / direct sunshine.
1. Wait until overnight for signal to be received.
2. Move your weather station away from sources of
electricity.
1. Make sure you select the right time zone.
EN. 9