Page 1 shīrudo シールド INSTRUCTION MANUAL...
Page 2: Table Of Contents
CONTENT Controls Buttons overview Top view Front view Bottom view Rear view Important safety instructions Introduction of features Before you can use this product Power supply AC operation Lithium battery operation and charging Battery safe mode User safety precautions Navigation controls Getting started Installations using the “Setup Wizard”...
Page 3 Streaming data rate Friendly name Music Player Use with Windows, Mac, Linux Accessing your audio files via a UPnP server Set up UPnP access on a Windows PC Locating and playing media files using UPnP Listening to a complete album Listening to a particular track Controlling playback Repeat tracks...
Page 4 Bluetooth Connecting Bluetooth devices Playing audio files Display modes Answering incoming phone call Redialling last number Bluetooth Options Bluetooth Info of the radio Connected device to the radio Connecting a Bluetooth device Reconnecting the mobile devices ever connected 100 Auxiliary input socket Inactive Standby feature Clock and Alarms Automatically updating the clock...
Page 5 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING! WARRANTY BECOMES VOID ONCE THE DEVICE CABINET HAS BEEN OPENED OR ANY MODIFICATIONS OR ALTERATIONS TO THE ORIGINAL DEVICE HAVE BEEN MADE.
Page 6: Controls
CONTROLS CONTROLS CONTROLS BUTTONS OVERVIEW Button overview Button overview 1. Info 8. Tuning / Seek / Select / Phone control 1. Info 8. Tuning / Seek / Select / Phone control 1. Info 8. Tuning / Seek / Select / Phone Control 2.
Page 7: Front View
CONTROLS CONTROLS FRONT VIEW Front view Front view 17. Bluetooth connected LED 18. Speakers 17. Bluetooth connected LED 18. Speakers 17. Bluetooth connected LED 18. Speakers Bottom view Bottom view BOTTOM VIEW 19. Microphone 19. Microphone 19. Microphone...
Page 8: Rear View
CONTROLS REAR VIEW Rear view 20. USB-In and DC-Out socket 23. DC-In Jack 21. Headphone Jack 24. Lithium Polymer battery compartment 20. USB-In and DC-Out socket 23. DC-in jack 22. AUX-IN Jack 21. Headphone jack 24. Lithium Polymer battery compartment 22.
Page 9: Important Safety Instructions
Do not block any ventilation openings. Install in accordance with the instructions. Do not install near any heat sources such as radiators, heat registers, stoves or IMPORTANT SAFETY INSTRUCTIONS other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer. Read these instructions.
Page 10: Introduction Of Features
INTRODUCTION OF FEATURES The Audisse Shirudo provides the following features in an attractive compact unit: ● Listen to local, regional, national and international broadcasts using FM, DAB and Internet radio ● Listen to over 1000 radio stations from around the country, and over 10,000 from around the world without using your PC.
Page 11: Before You Can Use This Product
BEFORE YOU CAN USE THIS PRODUCT Before you can use Audisse Shirudo, you must have the following: ● A broadband Internet connection (not required for DAB, FM, Bluetooth, AUX-IN or Music Player functions). ● A wireless router (WiFi) connected to your broadband Internet Service Provider, preferably via a router.
Page 12: Power Supply
WiFi network. This may take up to one minute. When the Audisse Shirudo is operated on AC power and put into Standby mode it will remain in Standby mode (date and clock display) and can remain connected to the WiFi network.
Page 13: User Safety Precautions
The optimum working life from the built-in battery will be obtained if it is kept topped up by recharging after each use of the Audisse Shirudo, even if it is only partially discharged. The battery’s working life will be reduced if the product is left in a discharged condition for a long period of time.
Page 14 Do not puncture, crush, modify, throw or cause any unnecessary shock to your battery, as the battery used in this device may present a risk of fire, explosion, or chemical burn if mistreated. Do not leave, charge or use the battery in a car under direct sunlight, near fire or a heated source.
Page 15: Navigation Controls
NAVIGATION CONTROLS This page describes the basic means of controlling your Audisse Shirudo sound system. Instructions for each operating mode are given in the later sections of this book. Pressing the Power button brings Audisse Shirudo out of Standby mode.
Page 16: Getting Started
00 / 00 / 0000 00:00 To continue to setup Audisse Shirudo press the Power button. If this is the first time that you use Audisse Shirudo (or after a Factory Reset) the display will show ‘Setup wizard’ and ‘YES’...
Page 17 Press the Tuning/Seek/Select control to select ‘YES’ and to begin setting up Audisse Shirudo. Setup wizard Start now ? TUNING SEEK/SELECT The Language menu will be shown on the screen for you to select your preferred language. By default Audisse Shirudo will display all menus and messages in English.
Page 18: Connecting To Your Computer Network
OFF * CONNECTING TO YOUR COMPUTER NETWORK Before you can use your Audisse Shirudo sound system to listen to Internet radio or to music streamed from your computer, it must first be connected to your computer network. This section of this book describes how to connect the sound system to your network using the wireless (WiFi) connection.
Page 19 TUNING [Rescan] SEEK/SELECT [Manual config] It is possible, and in some locations highly likely, that Audisse Shirudo will find more than one wireless network, in which case you should choose which one you need to connect to. VOLUME EQUALIZER 4. Rotate the Tuning/Seek/Select control to see the SSID for each wireless network that has been found.
Page 20 [Manual config] INFO If your network name is being broadcast, and it was not found, then try re-scanning (press the Back button), and if necessary try moving Audisse Shirudo to a location closer to your access point / router. PRESET 6.
Page 21 WEP keys are 10 or 26 characters long (using 0 - 9, and A - F). Some wireless routers can also use pass-phrases for WEP but these are not supported by the sound system. WPA keys are usually set up using a pass-phrase of between 8 and 63 characters. Audisse Shirudo accepts pass-phrases for WPA keys.
Page 22: Changing The Network Connection
Press ‘SELECT’ to exit 10. Once you have connected Audisse Shirudo to the network (and therefore also to the Internet) it will display the Main menu. Press the Power button to put the sound system into Standby/Off mode. It should then display the time as obtained from the Internet. If the time display is not correct for any reason, it can easily be adjusted later, ‘Manually setting the...
Page 23: Manual Network Configuration
network parameters. The steps outlined below describe how you can do this - see also the section ‘Network profiles’. Main menu System settings Bluetooth Equaliser > Network AUX-IN > Sleep Time/Date > Alarms Brightness > System settings > Language > CONFIGURING THE SOUND SYSTEM TO USE AN ALTERNATIVE WIFI CONNECTION 1.
Page 24 3. The next menu asks whether you wish to use DHCP to configure your network parameters (IP address, subnet mask, gateway address, etc.). Unless you are familiar with networking and related terminology, we recommend that you allow the use of DHCP. Choose ‘DHCP enable’...
Page 25 This should be the same as specified in your router settings. If your network does not use encryption, then select the ‘Open’ option. Audisse Shirudo should then connect to the network, so skip to step 11. If your network uses WEP (Wired Equivalent Privacy) select the ‘Pre-Shared Key’...
Page 26 SSID entry screen (step 6). Once connected, the network settings are stored in the sound system. The settings are retained when the sound system is disconnected from the mains. You may now use the Back and Source buttons to access the functions of Audisse Shirudo. Network settings...
Page 27: Network Remote Control Options
KEEP NETWORK CONNECTED Audisse Shirudo has the option to shut down its WiFi when it is in Standby. This minimises power consumption but it does mean that you will need to switch the sound system on manually in order to use either the ‘Play to’...
Page 28: Internet Radio - The Basics
INTERNET RADIO - THE BASICS Before you can use Audisse Shirudo to listen to broadcasts via the Internet, it is necessary to have connected it to your computer network using the wireless (WiFi) connection. There are literally many thousands of radio broadcasts available via the Internet as well as ‘Podcasts’.
Page 29: Selecting A Radio Station By Location
SELECTING A RADIO STATION BY LOCATION 1. Press the Power button to switch the sound system on. Then press the Source button to select the Internet radio mode display. SOURCE TUNING SEEK/SELECT 2. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning/Seek/ MENU Select control until ‘Station list’...
Page 30 6. The display will show a list of countries within the chosen continent. If there are many countries shown you can scroll through the list continually in either direction. For example, if the chosen continent was Europe, then to find the Netherlands scroll up from the top of the list to the bottom by turning the Tuning/Seek/Select control anti-clockwise.
Page 31: If Your Radio Cannot Connect To A Radio Station
IF YOUR RADIO CANNOT CONNECT TO A RADIO STATION Note: If Audisse Shirudo is unable to connect to an internet radio station it will generally either display ‘Network Error’ or ‘Stopped’. This can be for many reasons, but typically will be due to one of the following: The radio station may not be broadcasting at the present time.
Page 32: Selecting A Radio Station By Genre
SELECTING A RADIO STATION BY GENRE 1. Press the Menu button to enter the main Internet radio menu. Rotate the Tuning/Seek/ Select control until ‘Station list’ is highlighted on the display and then press the control to SOURCE select. TUNING SEEK/SELECT Internet radio MENU...
Page 33 Alternative All Stations > Highlighted Stations > Argentina > Australia > Austria > 6. A list of radio stations is then shown. Rotate the Tuning/Seek/Select control until the desired station name is highlighted on the display. All Stations 001A_A Rock 1.Fm Alternative Rock ...
Page 34: Searching For A Radio Station By Name
SEARCHING FOR A RADIO STATION BY NAME There may be occasions when you know the name of a radio station but you do not know the location or genre. This facility allows you to search for the station using a part (or parts) of the radio station name.
Page 35 Stations Radio 10 0123456789 . _ - @ , BKSP abcdefghijklmn opqrstuvwxyz ABC CANCEL DEFGHIJKLMNOPQR 5. The sound system will search for radio stations that match your search data. If you include a space between two search items, the sound system will look for station names that include both items.
Page 36: Selecting A Podcast
These are commonly known as Podcasts. On Audisse Shirudo, both Listen Again programmes and Podcasts are grouped together as Podcasts, and the same menu is used to access and listen to both types of programming.
Page 37 4. Rotate the Tuning/Seek/Select control and then press the control to confirm your chosen podcast. The display will show ‘Connecting...’ while it finds the new programme. Podcasts AVRO Andermans Vere > AVRO Sandwich > AVRO Schiffers FM > Musical Moods >...
Page 38: Selecting A Polupair Station
SELECTING A POPULAIR STATION As described in the section ‘Internet Radio – the basics’, your radio connects via the Internet to a database of radio stations. This option is provided to highlight stations that are newly added to the list of those available, or stations that are particularly popular with listeners around the world.
Page 39: Presetting Stations
Please see also the sections ‘Last Listened’ and ‘Configuring My Favourite Stations’. FWD. STORING A PRESET VOLUME 1. Press the Power button to switch on Audisse Shirudo. Tune to the required station using BACK one of the methods described on the preceding pages. EQUALIZER 2.
Page 40: Recalling A Preset
LAST LISTENED PRESET + It is often helpful to be able to go back to a station that you have recently listened to. Audisse Shirudo has a ‘Last Listened’ feature that provides you with quick access to the ten most recently listened to radio stations or podcasts.
Page 41: Display Modes
MENU DISPLAY MODES VOLUME EQUALIZER FWD. Audisse Shirudo has a range of display options when in Internet Radio mode. Note that not all information may be available for all Internet radio stations VOLUME BACK EQUALIZER 1. Press the Info button to cycle through the different options.
Page 42 Format Displays the bit rate and format of the station being received. Internet radio 10:02 NPO 3FM Bit rate: 192 kbps Codec: Mp3 Samping rate: 48.0kHz Playback buffer Displays status when connecting to and playing a radio station. This indicates the reliability of the data stream to your radio.
Page 43: Customising Your Radio
‘My Favourites’ and ‘My Added Stations’. Audisse Shirudo uses a database that is accessed via the Internet in order to find out which radio stations are available and how it should connect to them. You are able to add your personal selections to this database.
Page 44: Configuring My Favourite Stations
Audisse Shirudo. Suitable names might be ‘Rock’, ‘Smooth’, ‘Mum’s stations’, and so on. When ever you add another radio station to your favourites you can either add it to an existing category or create a new one.
Page 45: Selecting Your Favourite Stations
4. It is possible to add the web addresses for audio streams that may not be playable by Audisse Shirudo. If you attempt to play such a stream, Audisse Shirudo will normally display an error message of some kind. The Audisse Shirudo can only play MP3, WMA, FLAC, AAC and Real Audio streams.
Page 46: Selecting Your Added Stations
My Favourites myRadio list > 4. Rotate the Tuning/Seek/Select control to highlight the required station and then press the control to confirm your selection. The display will show ‘Connecting...’ while it finds the new station. My Favourites Antenne Bayern NPO 3FM NDR 2 NPO 1 FM If the station has on-demand content (that is, it gives the option of listening to programmes...
Page 47 In addition, it is possible to specify audio streams for ‘My added stations’ that are not compatible with Audisse Shirudo. In this event the station will not be playable. The Audisse Shirudo can only play MP3, WMA, FLAC, AAC and Real Audio streams.
Page 48: Spotify Connect
SETTING UP SPOTIFY CONNECT For more details about setting up Spotify Connect, please go to spotify.com/connect To use Spotify with your AUDISSE Shirudo radio you will need to download the Spotify app and you will need a Spotify Premium account.
Page 49 Spotify Connect icon will be become green. Tapping the Connect icon will show a list of Connect enabled devices and allow remote control of the volume. 4. To select your radio choose Audisse Shirudo on the Spotify Connect devices screen. You are now ready to play music through your radio using Spotify Connect.
Page 50: Controlling Spotify On Your Radio
TUNING SEEK/SELECT MENU Note: On some devices the layout of controls within the Spotify app may be different from that shown and may also change with different versions of the app. Refer to spotify.com/ connect if needed. SOURCE FWD. TUNING SEEK/SELECT CONTROLLING SPOTIFY ON YOUR RADIO VOLUME...
Page 51: To Select Spotify
TO SELECT SPOTIFY If you have previously connected using the Spotify Connect app you may select Spotify using the Source button on your radio. 1. Press the Source button to select the Spotify mode. SOURCE SOURCE TUNING TUNING SEEK/SELECT SEEK/SELECT Please note if the power is removed you will need to re-connect Spotify with your radio using MENU MENU...
Page 52: Streaming Data Rate
d. Bit rate Displays the bit rate and sampling rate of the track currently playing. Spotify Connect 10:02 Hello Bit rate: 320kbps Sampling rate: 44100 Hz e. Playback buffer Displays the radios internal buffer level. Spotify Connect 10:02 Hello Playback buffer Whenever the radio is displaying an information screen, the time is displayed in the top-right corner of the display, and a WiFi strength or Ethernet connection indicator is shown in the bottom-right corner.
Page 53: Friendly Name
USB memory device plugged into the radio. In order to play files from a computer on your network, Audisse Shirudo must connect to a file server application that uses the Universal Plug and Play (UPnP) protocol. If your computer uses Windows XP or Vista, then it is likely that your computer already has a UPnP server application available.
Page 54: Accessing Your Audio Files Via A Upnp Server
‘Add to Library... > Advanced Options’, click ‘Add’, choose the files you wish to add and click ‘OK’. The next step is to connect Audisse Shirudo to Windows Media Player 11 and to configure the program to allow the sound system to access your media library.
Page 55 WMP 11 to communicate. 8. On the sound system, select the named server again using the Tuning/Seek/Select control. If WMP 11 is now able to communicate with Audisse Shirudo you will be presented with some media selection options on the display.
Page 56: Locating And Playing Media Files Using Upnp
LOCATING AND PLAYING MEDIA FILES USING UPNP Once the UPnP server has been configured to share media files with Audisse Shirudo, you may select the files that you wish to play as follows: 1. Press the Power button to switch on the unit. Press the Source button as needed until the Music Player mode display is shown.
Page 57: Listening To A Complete Album
Music All music > Genre > All Artists > Contibuting Artists > Album Artists > When you first set up sharing with a UPnP server, not all of your files will be available immediately. The UPnP server must look inside each file to identify the artist and album information from ‘tags’...
Page 58: Listening To A Particular Track
While the sound system is playing from your media library, you may use the menus as described above to choose a different selection. When you select the track from which to play, the sound system will then immediately begin playing the new selection. LISTENING TO A PARTICULAR TRACK 1.
Page 59: Repeat Tracks
PRESET - 4. To start playback of the next track in the list, press the Preset +/ Skip Forward button. PRESET + REPEAT TRACKS 1. Ensure you are in the main Music Player menu. 2. Rotate the Tuning/Seek/Select control until ‘Repeat play’ is highlighted. Music player Shared media >...
Page 60: Display Modes
SEEK/SELECT MENU DISPLAY MODES Audisse Shirudo has a range of display options when in Music Player mode. Note that the availability of information depends on the specific media files, their format and upon the FWD. server capability. (Not all UPnP servers make information from the media files available in the same way.)
Page 61: Playlists
- as background music for a party, for example. Audisse Shirudo can be configured to hold a queue of up to 500 tracks in a playlist menu. The tracks or albums for the playlist can be selected from your UPnP serve. The playlist is held in memory in Audisse Shirudo until external power is removed, or until the playlist is cleared from the menu.
Page 62: Adding A Track To Playlist
ADDING A TRACK TO PLAYLIST When selecting (or when playing) a track using a UPnP server press and hold the Tuning/ Seek/Select control and the display will show ‘Added to My playlist’. My playlist Hello > Added to My When We Were Young > TUNING playlist Rolling In The Deep...
Page 63: Erasing A Track
2. Rotate the Tuning/Seek/Select control until ‘My Playlist’ is highlighted on the display. Press the control to enter the playlist. My playlist Hello > When We Were Young > TUNING Rolling In The Deep > SEEK/SELECT Set Fire To The Rain >...
Page 64: Clearing The Playlists
My playlist Delete from My playlist? 5. If you do not wish to delete the track from the list rotate the Tuning/ Select control to highlight ‘NO’ and press the control to cancel the operation. CLEARING THE PLAYLISTS SOURCE TUNING 1.
Page 65: Playing Your Playlists
PLAYING YOUR PLAYLISTS SOURCE 1. Press the Menu button to enter the main Music Player menu. TUNING SEEK/SELECT MENU 2. Rotate the Tuning/Seek/Select control until ‘My playlist’ is highlighted on the display. Press FWD. the control. Music player VOLUME BACK Shared media >...
Page 66: Using Usb Memory Devices
USB device. The Shirudo radio has been tested with a range of USB memory devices of up to 128GB capacity. USB memory must use the FAT or FAT 32 filing system in order to operate with your radio.
Page 67: Playing Files From Usb Memory Devices
The maximum depth of folder nesting permitted is 8 folder levels (but playback is only from the currently selected level). Shuffle and Playlist functions are limited to 500 tracks. Cautions: Remove the USB memory before carrying the unit or if not using the USB feature for a prolonged period.
Page 68: Display Modes
SEEK/SELECT MENU DISPLAY MODES Audisse Shirudo has a range of display options when in Music Player mode. Note that the FWD. availability of information depends on the specific media files, their format and upon the server capability. (Not all UPnP servers make information from the media files available in the same way.)
Page 69 c. Album Displays the album information for the track currently playing. Music player 10:02 Hello Album: d. Folder Displays the folder name of the current playing track. Music player 10:02 Hello Folder: AAC music e. Path Displays the path of current playing track in the USB. Music player 10:02 Hello...
Page 70: Playlists
h. Date Displays date information. Music player 10:02 Hello Date: 31/10/2016 Whenever the USB Player is displaying an information screen (as opposed to a menu screen), the time is displayed in the top-right corner of the display, and a WiFi strength is shown in the bottom-right corner together with an indicator.
Page 71: Adding An Entire Album Or Folder
ADDING AN ENTIRE ALBUM OR FOLDER 1. When using a UPnP server or a USB memory device highlight the chosen album, artist or folder and press and hold the Tuning/Seek/Select control. The display will show ‘Added to My playlist’. 2. Each of the tracks within the album, artist or folder selection will be added to the playlist individually.
Page 72: Clearing The Playlist
Music player Shared media > USB playback TUNING My Playlist > SEEK/SELECT Repeat play: Off Shuffle play: Off 3. Rotate the Tuning/Seek/Select control until the track you wish to erase is highlighted. VOLUME Press and hold the Tuning/Seek/Select control. EQUALIZER 4.
Page 73: Playing Your Playlists
PLAYING YOUR PLAYLISTS SOURCE 1. Press the Menu button to enter the main Music Player menu. TUNING SEEK/SELECT MENU 2. Rotate the Tuning/Seek/Select control until ‘My playlist’ is highlighted on the display. Press FWD. the control. VOLUME Music player BACK EQUALIZER Shared media >...
Page 74: Dab+ Digital Radio
DAB+ DIGITAL RADIO USING DAB MODE FOR THE FIRST TIME 1. Carefully extend the telescopic aerial. Please make sure the antenna does not make contact with the metal handle. This influences the reception level. 2. Press the Power button to switch on the sound system. If the sound system has been used before the last used mode will be selected.
Page 75: Selecting A Dab Radio Station
EQUALIZER 6. If the station list is still empty after the scan the display will show ‘Service not available’. If no stations are found it may be necessary to relocate Audisse Shirudo to a position giving better reception. SELECTING A DAB RADIO STATION 1.
Page 76: Secondary Services
VOLUME EQUALIZER Note: If the display shows ‘Station Not Available’ it may be necessary to relocate Audisse Shirudo to a position giving better reception. A question mark in front of the station name merely indicates that the station has not recently been detected by the sound system.
Page 77 b. Program Type Displays the type of station being listened to such as Pop, Classic, News etc. DAB radio 10:02 NPO 3FM Pop Music c. Multiplex Name / Frequency Displays the name of the DAB multiplex to which the current station belongs as well as its broadcast frequency. DAB radio 10:02 NPO 3FM...
Page 78: Finding New Dab Radio Stations
FINDING NEW DAB RADIO STATIONS Should you wish to use Audisse Shirudo for DAB reception in a new location, or if no stations were detected during the initial scan, you can follow this procedure to allow Audisse Shirudo to find out which DAB radio stations are available.
Page 79: Manual Tuning
DAB radio Station list > Full scan > Manual tune > TUNING SEEK/SELECT Prune > 4. Press the Tuning/Seek/Select control to initiate the scan. The display will show ‘Scanning’ VOLUME and your radio will perform a scan of the DAB frequencies used in the country. As new EQUALIZER stations are found the station counter will increase and stations will be added to the list.
Page 80: Dynamic Range Control Settings
Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment by reducing the dynamic range of the audio signal. 1. Press the Power button to switch on Audisse Shirudo. 2. Press the Source button as needed to select DAB radio mode.
Page 81: Station Order Setup
DRC setting in the sound system will have no effect. STATION ORDER SETUP Audisse Shirudo has 3 station order settings from which you can choose. The station order settings are, alphanumeric, ensemble and valid. Note: The default station order on your radio is alphanumeric.
Page 82: Prune Stations
The Prune stations function will delete the marked DAB stations from your station list. 1. Press the Power button to switch on Audisse Shirudo. 2. Press the Source button as needed to select DAB radio mode.
Page 83 If you do not wish to prune stations, highlight ‘NO’ and then press the control. The display will PRESET + revert to the previous menu. Note: If you have moved Audisse Shirudo to a different part of the country you should also carry out a search for new stations.
Page 84: Fm Radio
FM RADIO OPERATING IN FM MODE 1. Carefully adjust the rod antenna and press the Power button to switch on Audisse Shirudo. 2. Press the Source button as needed to select FM radio mode. SOURCE TUNING SEEK/SELECT radio MENU FWD.
Page 85: Manual Tuning
MANUAL TUNING 1. Carefully extend the telescopic aerial and press the Power button to switch on Audisse Shirudo. 2. Press the Source button as needed to select FM radio mode. SOURCE TUNING SEEK/SELECT radio MENU FWD. 3. Rotate the Tuning/Seek/Select control to control the frequency that the radio will tune to.
Page 86: Scan Setting
The stereo speaker display shows that the radio is receiving a stereo broadcast. SCAN SETTING When using the FM mode Audisse Shirudo can be set to either scan local stations or to scan all stations including distant radio stations. 1. Press the Source button as needed to select FM radio mode.
Page 87: Stereo / Mono Switching
SOURCE TUNING 2. Press the Menu button to enter the FM menu. SEEK/SELECT FM radio MENU Scan setting Audio setting System settings > FWD. Main menu > VOLUME BACK EQUALIZER 3. Rotate the Tuning/Seek/Select control until ‘Scan setting’ is highlighted and then press the control to enter the scan adjustment mode.
Page 88 SOURCE TUNING SEEK/SELECT radio MENU SOURCE FWD. 2. Press the Menu button to enter the FM menu. TUNING SEEK/SELECT VOLUME FM radio MENU BACK Scan setting EQUALIZER Audio setting System settings > FWD. Main menu > INFO VOLUME BACK EQUALIZER 3.
Page 89: Presetting Stations In Dab And Fm Modes
There are 40 memory presets each for DAB and FM radio. They are used in the same way for each operating mode. SOURCE TUNING The Audisse Shirudo has the unique function of Preset + and Preset – SEEK/SELECT This enables you to quickly zap through your whole preset list. MENU When performing a Factory Reset the whole Preset memory of the radio will be emptied.
Page 90: Recalling A Preset In Dab And Fm Modes
FWD. RECALLING A PRESET IN DAB AND FM MODES VOLUME 1. Press the Power button to switch on Audisse Shirudo. BACK EQUALIZER SOURCE 2. Select the required operating mode using the Source button. TUNING INFO SEEK/SELECT SOURCE MENU TUNING SEEK/SELECT 3.
Page 91: Bluetooth
Bluetooth capable devices such as your mobile phone, computer, tablet etc. through your Audisse Shirudo’s loudspeakers. ● When a Bluetooth enabled device such as your Audisse Shirudo sound system is in a ‘ discoverable’ state other Bluetooth devices can detect, pair with or connect to it. ●...
Page 92: Connecting Bluetooth Devices
6. Using the Bluetooth settings of your phone, tablet or PC direct it to search for PRESET ‘discoverable’ devices. After a few seconds, you should see a device named ‘Audisse Shirudo’. Just occasionally it may take longer for the sound system to be found by your device. PRESET -...
Page 93: Playing Audio Files
P l e a s e c o n n e c t w i t h a d e v i c e t o : Audisse Shirudo 7. Select ‘Audisse Shirudo’ to cause your phone, tablet or PC to pair with your sound system and to establish a connection.
Page 94: Display Modes
BACK EQUALIZER FWD. However, if you are using headphones plugged into your sound system, we strongly recommend that the sound system’s volume control would be used as the means of adjusting INFO PRESET the audio volume. You will then need to set the volume on the connected Bluetooth device to VOLUME a higher level.
Page 95: Answering Incoming Phone Call
ANSWERING INCOMING PHONE CALL The Hands Free Calling feature allows you to answer an incoming phone call when the sound system has been connecting to a Bluetooth mobile phone. 1. Press the Tuning/Seek/Select control (Phone icon) on the right to pick up an incoming call. TUNING SEEK/SELECT 2.
Page 96: Bluetooth Options
The Bluetooth function can be set to operate in different ways as below: 1. Press the Power button to switch on the Audisse Shirudo sound system. 2. Press the Source button on your sound system until the Bluetooth is selected.
Page 97: Bluetooth Info Of The Radio
In Bluetooth mode, it is possible to check the current Bluetooth status of the sound system. 1. Press the Power button to switch on the Audisse Shirudo sound system. 2. Press the Source button on your sound system until the Bluetooth is selected.
Page 98: Connected Device To The Radio
You can check the Bluetooth friendly name of current connected device in the sound system. 1. Press the Power button to switch on the Audisse Shirudo sound system. 2. Press the Source button on your sound system until the Bluetooth is selected.
Page 99: Connecting A Bluetooth Device
Your Audisse Shirudo sound system will become ‘discoverable’ by other devices. The PRESET - Bluetooth indicator on the front panel will flash fast and showing “Bluetooth Discoverable”, “Please connect with a device to: Audisse Shirudo” on the display. The sound system will PRESET - then be discoverable by other devices.
Page 100: Reconnecting The Mobile Devices Ever Connected
4. Then pair the sound system with the new device using its Bluetooth settings (the sound system will be listed as ‘Audisse Shirudo’. The name of the newly connected device will be briefly shown on the sound system’s display. You may then play music from the new device through the sound system.
Page 101: Auxiliary Input Socket
Keep the rubber cover well closed under these conditions. A 3.5mm Auxiliary Input socket located on the rear of Audisse Shirudo is provided for connecting the audio signal from an external audio source such as an MP3 or CD player.
Page 102: Inactive Standby Feature
Alternatively you may specify that the time is not automatically updated. In this case the clock must always be set manually after a power interruption. 1. With Audisse Shirudo switched on, press the Menu button to access the menu for the SOURCE current mode.
Page 103: Manually Setting The Clock
No update MANUALLY SETTING THE CLOCK The Audisse Shirudo sound system will normally set its clock automatically to the time zone as you selected in the setup wizard after a connection to the Internet has been established. Should you need to set the time manually, change the time zone, or manually switch from winter to summer time, then please follow this procedure.
Page 104 SOURCE TUNING 2. Press the Menu button to access the menu for the current mode. SEEK/SELECT MENU 3. Rotate the Tuning/Seek/Select control until ‘System settings’ is highlighted on the display. FWD. Press the control to enter the system settings menu. Main menu VOLUME BACK...
Page 105 7. Rotate the Tuning/Seek/Select control to select the correct month. Press the control to enter the selection. The year digits will then flash. Date/Time 08-03-2016 TUNING 12:01 SEEK/SELECT 8. Rotate the Tuning/Seek/Select control to select the correct year. Press the control to enter VOLUME the selection.
Page 106: Setting The Alarm Clock
EQUALIZER SETTING THE ALARM CLOCK Audisse Shirudo has two separate alarms that can be set to wake you to either the radio or a buzzer alarm. In the event of a power interruption Audisse Shirudo has built in memory that will retain your alarm settings.
Page 107 2. Rotate the Tuning/Seek/Select control until ‘Alarms’ is selected on the display. Press the control to see the current alarm settings. If no change is required, press the Menu or Back buttons to exit. Main menu Bluetooth AUX-IN Sleep TUNING SEEK/SELECT Alarms System settings...
Page 108 7. Rotate the Tuning/Seek/Select control to highlight ‘Enable’ and press the control. The display will show the Frequency options for the alarm. The alarm frequency options are as follows: ‘Off’ - the alarm will be disabled ‘Daily’ - the alarm will sound everyday ‘Once’ - the alarm will sound once ‘Weekends’...
Page 109: When The Alarm Sounds
Alarm 1 Enable: Off Time: 07:40 Mode: Buzzer Volume: 25 Save Date/Time Alarm 1 Enable: Off Time: 07:40 Mode: Internet radio Preset: NDR 2 Volume: 5 11. In order to store the alarm settings rotate the Tuning/Seek/Select control until ‘Save’ is highlighted.
Page 110: Disabling Alarms
DISABLING ALARMS 1. To disable a single alarm enter the alarm setup menu and rotate the Tuning/Seek/Select control until the desired alarm is highlighted on the display. Press the Tuning/Seek/Select control. TUNING SEEK/SELECT 2. Rotate the Tuning/Seek/Select control until the ‘Enable:’ option is highlighted on the display.
Page 111: Sleep Timer
Set sleep time PRESET - 30 minutes 5. Audisse Shirudo will switch into stand-by mode after the preset time has elapsed. An active PRESET + sleep timer is shown using a small timer indicator at the bottom of the playing displays. This indicator also shows the sleep time remaining before the radio switches itself into standby mode.
Page 112: Equaliser Function
EQUALISER FUNCTION The sound on Audisse Shirudo can be adjusted to suit your personal taste for the material that you are listening to. The Audisse Shirudo has a range of equaliser modes. Alternatively you may set the treble and bass levels to your own preferences that can be accessed from the My EQ menu item.
Page 113: Setting Up Your My Eq Profile
SETTING UP YOUR MY EQ PROFILE If you find the preset equaliser functions not to your liking, you may set up a custom treble and bass setting as follows: 1. Follow steps 1-3 on the preceding page in order to enter the Equaliser menu. 2.
Page 114: Brightness Control
There are three brightness levels and an almost off ‘night-time’ setting. SOURCE 1. Press the Power button to switch on Audisse Shirudo. Access the menu for the current TUNING mode by pressing the Menu button.
Page 115: Headphone Socket
HEADPHONE SOCKET A 3.5mm Headphone Socket located on the rear of Audisse Shirudo is provided for use with headphones. Inserting a plug automatically mutes the internal loudspeaker. Please be aware that the sensitivity of headphones can vary widely. We therefore recommend setting volume to a low level before connecting headphones to the sound system.
Page 116 It may be necessary in some cases to disconnect the mains power, then VOLUME reconnect power after 10 seconds. EQUALIZER audisse shirudo START UP In case of malfunction due to electrical fast transient (burst), reset the product as above (reconnection of the power source may be required) to resume normal operation.
Page 117: Software Update
Update software?’. Select the ‘YES’ option if you wish to go through the update process. Software update Auto-check setting Check now TUNING SEEK/SELECT 3. If you choose to update Audisse Shirudo it will first download the new software and will VOLUME EQUALIZER...
Page 118: Network Profiles
4. Once the software update is completed, the sound system will prompt you to press Select to restart. Press the Tuning/Seek/Select control and Audisse Shirudo will then restart. You may find that you will need to reconfigure your network connection following an update. You may also need to re-enter all radio station presets, alarm settings, and configuration options.
Page 119: Software Version Display
marked with an asterisk. Network profile Jame’s group Wilson 4. To remove a profile from memory, rotate the Tuning/Seek/Select control to highlight the profile to be deleted and then press the control. Confirm delete Conform detele 5. The radio will offer a ‘YES’ or ‘NO’ selection. Rotate the Tuning/Seek/Select control to select ‘YES’...
Page 120: Volume
Audisse Shirudo can access some audio help for Internet Radio use. 1. With Audisse Shirudo switched on and in the Internet Radio mode, press the Menu button. Rotate the Tuning/Seek/Select control until ‘Station list’ is highlighted on the display. Press...
Page 121: Troubleshooting
SOURCE TUNING SEEK/SELECT Internet radio MENU Last listened Station list > System settings > FWD. Main menu > VOLUME BACK EQUALIZER 2. Rotate the Tuning/Seek/Select control until ‘Help’ is highlighted on the display. Press the Tuning/Seek/Select control to enter the Help menu. Internet radio INFO Local Netherlands...
Page 122 You will also need to enter the SSID, the encryption type, and the encryption key. If Audisse Shirudo can connect to the network, but is unable to play a particular internet radio station, it may be due to one these causes: 1.
Page 123: Music Player / Upnp Problems
If you are using Windows Media Player as your UPnP server, and if it fails to operate with Audisse Shirudo, please keep this fact in mind: A fresh installation of Windows and Windows Media Player when using Microsoft’s built-in firewall software will normally work.
Page 124: About Undok App
To do this, pull out the power plug and connect it again after a few seconds. ABOUT UNDOK APP The Audisse Shirudo supports remote control from Apple iPhone, iPad and Android using the UNDOK app. The apps are available in Apple’s app store and Google’s android play.
Page 125 • Setting Sleep timer; • Editing the displayed name of the Audisse Shirudo. INFORMATION ON THE METAL TELESCOPIC ANTENNA The antenna placed on this radio is a long, metal telescopic antenna. This antenna is NOT flexible or bendable and should be used with care.
Page 126: Specifications
SPECIFICATIONS POWER REQUIREMENTS AC adapter: 230 volts AC, 50Hz only (use only supplied adaptor) Built-in Lithium Polymer Battery: 11.1V, 4000mAH Frequency Coverage 87.5 - 108MHz DAB 174.928 - 239.200 MHz CONNECTIVITY WiFi Dual modes to support 2.4GHz and 5GHz WiFi system 802.11b and 802.11g supported with WEP and WPA/WPA2 encryption Compatible with 802.11n routers that offer mixed mode support for 802.11b/g.
Page 128 Prime Europe B.V. Everdenberg 9a 4902 TT Oosterhout The Netherlands www.audisse.com 03/17...

audisse Shirudo Instruction Manual

Quick Links

Need help?

Questions and answers

Related Manuals for audisse Shirudo

Summary of Contents for audisse Shirudo

Table of Contents