Table of Contents
Advertisement
2.1.2
ASUS EZ Flash 3
The ASUS EZ Flash 3 feature allows you to update the BIOS without using an OS‑based
utility.
•
Ensure that you load the BIOS default settings to ensure system compatibility and
stability. Select the Load Optimized Defaults item under the Exit menu.
•
Check your Internet connection before updating the BIOS via the Internet.
To update the BIOS using EZ Flash 3:
1.
Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select
ASUS EZ Flash 3 Utility and press <Enter> to enable it.
2.
Follow the steps below to update the BIOS via a storage device or Internet.
Via Storage Device
a)
Insert the USB flash disk that contains the latest BIOS file to the USB port, then
select via Storage Device.
Press <Tab> to switch to the Drive field.
b)
c)
Press the Up/Down arrow keys to find the USB flash disk that contains the latest
BIOS, and then press <Enter>.
Press <Tab> to switch to the Folder Info field.
d)
e)
Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to
perform the BIOS update process.
Via Internet
a)
Select via Internet.
b)
Press the Left/Right arrow keys to select an Internet connection method, and then
press <Enter>.
c)
Follow the onscreen instructions to complete the update.
3.
Reboot the system when the update process is done.
•
ASUS EZ Flash 3 supports USB devices, such as a USB flash disk, with FAT 32/16
format and single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Chapter 2: BIOS information
2-2
Hide quick links:
Advertisement
Table of Contents
