Advertisement
Quick Links
Advertisement
Summary of Contents for Montreux GV2
- Page 1 Instruction Manual Montreux...
-
Page 3: General Description
GENERAL DESCRIPTION BUTTON: • A : Pusher at 2 o’clock • B : Pusher at 4 o’clock • C- : Crown pulled • C+ : Crown pushed • C0 : Crown in neutral position... - Page 4 DIAL: • Central hands: Hour (1)/ Minute (2)/ Second(3) • 4 o’clock : First digit of date (4) or tenth of the chronograph (left wheel) • 5 o’clock : Second digit of date (5) or hundredth of the chronograph (right wheel) MODES This section describes the two different available modes:...
-
Page 5: Local Time
From this mode is possible to access to the other modes such as indexing or setting time. LOCAL TIME This mode displays the local time with hours, minutes and second. When entering into the local time mode the hands display these following elements: •... - Page 6 • Hand’s indexing: By pressing simultaneously the A and B pushers during more than two seconds. • Local time setting mode: By pulling the crown (C-). As previously defined the next mode, CHRONO 1/100 of second, is displayed by pressing the crow (C+).
- Page 7 CALIBRATING This mode is useful when you have a misalignment between the hands and the dial. Watch needs to be in TIME mode in order to calibrate After pressing simultaneously on the pushers A and B during more than two seconds, all hands go to their nominal position.
- Page 8 The nominal position is the following: • Minute: Hand (1) pointing “12” • Hour: Hand (2) pointing “12” • Second: Hand (3) pointing “12” • First Digit (4): Display “0” • Second Digit (5): Display “0” The indexation is performed as below: •...
-
Page 9: Local Time Setting
• At any time during the indexation, it’s possible to quit this mode by pressing the crown C+. LOCAL TIME SETTING This mode allows setting the local time. Description of the functionality: • By pulling the crown C- from any city time mode, the user enters directly into the Time setting mode. - Page 10 • At any time and in all states, it’s possible to quit the setting mode by releasing the crown back to neutral position C0. Display: • M1(center - short) displays the hours. • M2(center - medium) displays the minutes.
- Page 11 • M3 (center- long) indicates the type of setting. Thereafter the position of the second’s hand according the setting: • Hour Setting : 45’ = AM, 15’ = PM • Minute Setting : 30’ • Year Setting : 55’ • Month Setting : 00’...
- Page 12 CHRONO Hereafter the description of the chronograph 1/100 of second on 12 hours: Descriptions of the functionality: • Entry in this mode: By pressing the crown C+ twice from the time mode. There are three display possibilities : • Initialization: If the chrono isn’t running or after a reset.
- Page 13 • From the Running mode, there are two possibilities: • Pressing on A: Stop the chrono and display the measured time. • Pressing on B: Split the chrono and display the measured time, while the time is still running in background.
- Page 14 • From the Stop mode, two possibilities are available for the user : • Pressing on A: Return at the Running mode • Pressing on B: Reset of the chrono, display 00:00:00:00 • From all states: It’s possible by pressing the crown C+ twice to go to the next mode Time Display: •...
- Page 15 • M5 (4H30) • Displays “0” when the chrono is running. • Displays the hundredth when the chrono isn’t running (stop or split). The reset of the chrono is automatically performed after 11h 59min 59sec 00 1/100...
- Page 16 www.gevrilgroup.com 866-425-9882 •...
Need help?
Do you have a question about the GV2 and is the answer not in the manual?
Questions and answers