Page 2
INTRODUCTION Thank you for your purchase of the e-Turbine TB 100 FPV racer. We hope you will enjoy flying with it. This model comes as a frame kit or as a ARF built kit with most of the electronics provided. For both kits, assembly is made by the user.
Page 3
BNF KIT CONTENT LAYOUT Page 3 e-Turbine TB100 - User manual - Beez2B - Version 1.02 - February 2017...
Page 4
MAIN COMPONENTS INSTALL Close up on the 600 lines camera and the 5.8 GHz video transmitter. Page 4 e-Turbine TB100 - User manual - Beez2B - Version 1.02 - February 2017...
Page 5
When us DSM Satellite, FC can't trigger DSM Satellite (USART 2) √ (USART 1) satellite into binding mode, user need bind the satellite before connect it to FC. Page 5 e-Turbine TB100 - User manual - Beez2B - Version 1.02 - February 2017...
Page 6
Hardware Connection Diagram Page 6 e-Turbine TB100 - User manual - Beez2B - Version 1.02 - February 2017...
LED on: About 10 seconds flash one time, means it is in PPM mode and works fine. Beez2B wishes you nice fligths with your e-Turbine TB-100 FPV Racer ! Page 7 e-Turbine TB100 - User manual - Beez2B - Version 1.02 - February 2017...
Page 8
Page 8 e-Turbine TB100 - User manual - Beez2B - Version 1.02 - February 2017...
Need help?
Do you have a question about the TB100 and is the answer not in the manual?
Questions and answers