Bluetooth bbq thermometer
with touch screen (19 pages)
Summary of Contents for BABEI HT702
Page 1
INFRARED BODY THERMOMETER User Manual Model:HT702...
Page 2
User Manual Please read these instructions carefully before 1 sec.Measurement using the thermometer and keep it in a safe place. The Infrared Body Thermometer HT702 is a high Fever alarm quality product incorporating the latest technology and tested in accordance with Short beeps will sound when the international standards.
Symbols Safety Precautions In order to enable you use the thermometer Stand-by safely and properly, and keep away from the harm because of misusing, please note the Indicates is BF-type equipment. warning signs and symbols in the manual. European Union's Waste Electrical and Electric Warning signs, symbols and their meaning Equipment in accordance with Article 11(2) of Directive 2002/96/EC WEEE...
Page 4
storage site and measuring site. Warning Otherwise may get incorrect measurement results. It is very dangerous if the patients make self-judgement and treatment by means Do not measure body temperature within of measuring results. So please be sure to 30 minutes after meal, sports or bath. follow the doctor's guidance.
Page 5
Important Note Use of this IR thermometer is not intended asa substitute for consultation with your physician. Keep the infrared body thermometer far from the place which kid can touch. The measure result can not be substituted for the consultation from doctors. Avoid keep product in place with direct sunshine, high temperature, heavy humidity, dust, close to the fire, easy shock and...
Page 6
Display ambient temperature and time in turn...
Getting Started Changing from Celsius to Fahrenheit To toggle the measurement scale between Replacing the battery ℃ or ℉ by pressing and holding the This thermometer is supplied with SET button for 2 seconds one lithium battery,type CR2032 . Remove the battery cover by ( 3 .1) Set Time sliding it in the direction shown.
Page 8
Operating Guide When “ ” flashes, it means you can measure the ear temperature now. How to measure forehead temperature Straighten the ear canal by gently pulling (3.5 .1) Make sure the probe cap is on, the middle of the ear back and up. “...
Precaution Helpful Hints Use an alcohol swab or cotton tissue For accurate results,wait at least 30 minutes moistened with alcohol to clean the after exercising,bathing or returning from the thermometer casing and the outdoors. measuring probe. Wait at least 1 minute between readings. In order to assure the accurate readings,please wait at least If multiple readings are taken over a short...
Expected service life: 2 years Specifications Power supply: Name: DC3V(CR2032) Infrared Body Thermometer Power consumption: Model: HT702 Battery life: 1 year ( about 6000 times measuring) Applied Part: Probe Weight: about 45g(with battery) Measuring range: 34.0℃~42.1℃ Accuracy: Dimension: L46mm xW34mm xH122mm ±0.2℃(35.0℃~42.0℃)...
Products damaged by failure not follow the Product Guarantee instruction. Free repair the thermometer within one Remove or take away the series no and year since purchase date if proper use. reparation labels on products. Service: Thermometer must return to Consumables manufacturers, by professionally trained personnel to repair it.
Page 12
Name: Infrared Body Thermometer In the request for warranty service, you Item: HT702 must have a seal of the purchase date and place of purchase (including name Purchase date: and address). Be sure to purchase this...
Page 13
Table1-Guidance and MANUFACTURER’S declaration -ELECTROMAGNETIC EMISSIONS-for all EQUIPMENT and SYSTEMS Guidance and MANUFACTURER’S declaration -ELECTROMAGNETIC EMISSIONS The [ EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below.The customer or the user of the [ EQUIPMENT or SYSTEM] should assure that it is used in such an environment.
Page 14
Emissions test Compliance Electromagnetic environment – guidance The [ EQUIPMENT or SYSTEM] is suitable for [See 6.8.3.201 a) use in all establishments, including domestic 3)and Figure 201] establishments and those directly connected to the public lowvoltage power supply network that supplies buildings used for domestic purposes.
Page 15
Table2-Guidance and MANUFACTURER’S declaration - electromagnetic IMMUNITY- for all EQUIPMENT and SYSTEMS Guidance and MANUFACTURER’S declaration - ELECTROMAGNETIC IMMUNITY The [ EQUIPMENT or SYSTEM] is intended for use in the electromagnetic environment specified below. The customer or the user of the [ EQUIPMENT or SYSTEM] should assure that it is used in such an environment. Electromagnetic environment –...
Need help?
Do you have a question about the HT702 and is the answer not in the manual?
Questions and answers