Inateck HB4103 Instruction Manual
Inateck HB4103 Instruction Manual

Inateck HB4103 Instruction Manual

Aluminum unibody 3-port usb3.0 hub with ethernet adapter

Advertisement

Quick Links

HB4103
Aluminum Unibody 3-Port USB3.0
HUB with Ethernet Adapter

Instruction Manual

w w w . i n a t e c k . c o m

Advertisement

Table of Contents
loading

Summary of Contents for Inateck HB4103

  • Page 1: Instruction Manual

    HB4103 Aluminum Unibody 3-Port USB3.0 HUB with Ethernet Adapter Instruction Manual w w w . i n a t e c k . c o m...
  • Page 2 Inateck HB4103 Manual Introduction: Inateck HB4103 is an Aluminum Unibody 3-Port USB3.0 HUB with Ethernet Adapter. This new Universal USB 3.0 SuperSpeed 3-Port Hub and 10/100/000 Gigabit Ethernet LAN Network Adapter not only adds three USB 3.0 ports to your laptop or desktop, but also allows you to connect your device directly to your network via USB port.
  • Page 3: System Requirements

    ● 1 x Aluminum Unibody 3-Port USB3.0 HUB with Ethernet Adapter ● 1 x User Manual Hardware Installation: 1. Connect HB4103 with your computer, a “Found New Hardware” message will pop up and finish installation automatically. Meanwhile there will be a reminder of "Gigabit Ethernet driver installation", run it;...
  • Page 4 2. Open “Control Panel” - “Network connec- tion” to find a new “local connection” icon. 3. Insert the network cable to the RJ45 port. If your network has opened DHCP, you can obtain an IP address automatically, and then the network could be connected. 4.
  • Page 5: Mac Os Installation

    Mac OS Installation: This product is compatible with Mac OS10.6 and updated versions. No need driver installa- tion. User can enter the “Network” menu to make relevant settings. - 4 -...
  • Page 6 Manually set the IP address: Q1. I cannot have access to the internet connection although have successfully finished the installation. What’s the problem? Answer: First make sure your router has opened the IP DHCP function. If not, you need to set the IP address manually. If it is a community or school network, you need to get the authority from your administrator.
  • Page 7 Q3. How to check the product MAC address? Answer: Run “ipconfig /all” order under Windows to check the Mac address. Q4. Can it support Mac OS system? Answer: Yes, no drivers are needed. Q5. Why do I need to re-plug the network to make it work when restarting the PC under Mac OS system? Answer: This is not product failure, it was...
  • Page 8 Tel: 0341-5199 8407 (Service time: Mon.-Fri. 9:00 - 17:00 CET) Email: support@inateck.com Website: Http://www.inateck.com...

Table of Contents