Subscribe to Our Youtube Channel
Related Manuals for Dynasound DS1042
Summary of Contents for Dynasound DS1042
- Page 1 DS1042 Soundmasking System Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071 800.989.6275...
- Page 3 Equalization Set the volume control on the DS1042 unit to 9 o’clock and the equalizer (low pass filter) control to 6 o’clock (off position). Check all speakers to make sure that they are connected and operating properly.
- Page 4 If you have a sound level meter, measure the existing ambient background in several areas and record the lowest reading. Now go to the DS1042 unit and set the volume so that the masking level is 2 dBA above the lowest ambient reading that was recorded. If you do not have a sound level meter, set the vol- ume control on the DS1042 unit to eight (8) o’clock.
- Page 5 If credit has not been established, the repair and return will be C.O.D. Dynasound will notify the owner after any factory service whether it was a warranty repair or not.
Need help?
Do you have a question about the DS1042 and is the answer not in the manual?
Questions and answers