Subscribe to Our Youtube Channel
Summary of Contents for Takit V01
-
Page 1: User Manual
Smart Watch Model No.: V01 User Manual Thank you for choosing our product. For safe and optimal use of the watch, please, read this guide carefully before getting started. -
Page 2: Table Of Contents
Contents Contents ............................2 Warnings and safety instructions ....................4 Before you begin ..........................4 Charging the watch .......................... 5 The mobile application (for the guardian) ..................5 Downloading the mobile application ..................5 Registering a user and logging in ..................... 5 Setting up the application (connecting to a watch) ............... - Page 3 Some mobile numbers cannot call the watch. Why is that? ..........16 How to transfer the administration right to another person? ..........16 How to delete a previously added phone number? .............. 16 How to prevent other people from adding the watch to their phone? ....... 16 Why does it take a long time to receive voice messages? ............
-
Page 4: Warnings And Safety Instructions
Warnings and safety instructions Please, do NOT insert the SIM card into the watch before this manual instructs you to do so. Please, do NOT take out the SIM card when the watch is powered on. It could cause damage to the watch. -
Page 5: Charging The Watch
The mobile application (for the guardian) The TAKIT system consists of two parts. The watch and a linked smart phone that runs the TAKIT application logged on with a valid user account. One mobile phone can be connected to several watches and one watch can be linked to many user accounts. - Page 6 o If you select Mobile, the verification code will be sent to you in an SMS message to the given phone number. This number will be one of the registered phone numbers that can communicate with the watch. Note: in countries where the local mobile number starts with a zero (0), please, register with an email address.
-
Page 7: Setting Up The Application (Connecting To A Watch)
Setting up the application (connecting to a watch) Once you are logged in the mobile app, do the following to connect it to the watch: 1. Tap the icon in the top right corner of the Map screen to open the list of linked watches. -
Page 8: Main Functions
o To scan the QR code: Tap the middle of the screen to start the camera (allow using the camera if asked). Now scan the QR code that is on the back of your watch or on the outside of its packaging. Move the QR code towards or away from the phone until it is read automatically. -
Page 9: Main Menu
Warning: choosing Satellite mode may result in excessive data use in your mobile phone. When one watch is selected in the menu, you have the following options at the bottom of the Map screen: Tap Loc to see the current location of the watch. This will only work if the watch is turned on with an inserted SIM card, the SIM card has sufficient data and the watch has GSM signal (you see these icons on the watch display: ... - Page 10 If you have multiple watches linked to this phone, drag the picture at the top and slide your finger left and right to switch between watches. Tap Message center to check alerts and system messages like SOS calls, low battery alarm, entering/exiting geofence, watch removal, transferring of administrator rights etc.
-
Page 11: The Watch (For The Child Or Elderly)
Manual mode: the location will only be updated when you tap the Loc button on the Map screen. Note: Automatic mode uses more battery. o Mute: you can set up multiple time intervals when the watch will remain silent even if there is an incoming call or message. o Watch volume: adjust the volume of sound alerts and phone calls separately. -
Page 12: Operating The Watch
Close the SIM card slot cover and make sure it has been pushed into place tightly in order to avoid water entering the watch. Press and hold Button 4 for 3 seconds to power on the watch. The TAKIT logo appears on the screen and a chime is played. -
Page 13: Phone Calls
Soon after this an symbol should also appear. This shows that the data connection is ready. This is necessary to locate the watch from the mobile app and to send and receive voice messages. Note: If the symbol does not appear shortly after the symbol when you use the watch for the first time, the watch may not support your telecom operator. -
Page 14: Receiving Voice Messages
If there is no SIM card in the watch: press and hold Button 4 to turn off the watch. A chime will be played and the TAKIT logo appears on the display. When there is a SIM card in the watch: for safety reasons, the watch can only be turned off remotely. -
Page 15: Faq
Please, find the most often asked questions and their answers below. I cannot turn on the watch The battery in your watch might have run out of power. Please, connect the watch to a power source until fully charged and then try again. Where can I find the CID and IMEI (WID) numbers of the watch? When there is no SIM card in the watch: press any button to turn on the screen and then press Button 3quickly 3 times to see the WID (IMEI) number. -
Page 16: What Operation Systems Is The Mobile Application Compatible With
If the ambient light is low, move to a brighter area and retry scanning the QR code. Try adjusting the distance between the QR code sticker and the camera of the phone so that the auto focus can make a sharp picture and the QR code is large enough to reveal its details. -
Page 17: Why Does It Take A Long Time To Receive Voice Messages
If there is no SIM card in the watch: press and hold Button 4 to turn off the watch. A chime is played and the TAKIT logo appears on the display. When there is a SIM card in the watch: for safety reasons, the watch can only be turned off remotely.
Need help?
Do you have a question about the V01 and is the answer not in the manual?
Questions and answers