Advertisement
Congratulations on your purchase of the Rampage High Performance
Subwoofer. The Rampage Subwoofers are designed to provide you with high
quality Bass reproduction required to make your car audio system perform to
its full potential.
Dual 4-Ohm (AVW110/121) or Dual 6-Ohm (AVW111/122) voice coil for
maximum flexibility and performance
Double stacked magnet
Chrome plated stamped steel basket (AVW110/121) or Patented die-cast
aluminum basket (AVW111/122)
Patented thermo-cooling motor structure
3-Inch Hi-Temp Kapton voice coil structure (AVW111/122)
Nominal Power Rating 300 Wrms
Peak Power Rating
Double Stacked Magnet 110 Oz
Frequency Response
Resonant Frequency
Woofer Size
Nominal Impedance
Mounting Depth
WARNING:
High-powered car audio systems may produce sound
pressure levels that exceed the threshold at which hearing
loss may result. They may also impair a driver's ability to
hear traffic sounds or emergency vehicles. Use common
sense and practice safe listening habits when listening to
your audio system.
DUAL VOICE COIL WIRING
CAUTION:
Never connect only one voice coil of a dual voice coil woofer.
Both must be driven at the same time for proper operation.
Never connect an amplifier to an impedance load lower than
it is rated to handle.
SERIES/PARALLEL MONAURAL CONNECTION
Parallel wiring for a single, dual-voice coil 4-Ohm woofer in a monaural system will
result in a total impedance load of 2 Ohms at the amplifier, (See Fig. 1) if your
amplifier is rated to drive 2 Ohms in bridged or one-channel operation. If each of
two dual-voice coil 4-Ohm woofers are connected in parallel and then wired to
RAMPAGE Subwoofer Features
SUBWOOFER PARAMETERS
AVW110
AVW111
350 Wrms
600 W
700 W
110 Oz
40 Hz-1kHz
40 Hz-1kHz 40 Hz-1kHz 40 Hz-1kHz
55 Hz ± 20% 55 Hz ± 20% 55 Hz ± 20% 55 Hz ± 20%
10"
10"
4 Ohms x 2
6 Ohms x 2 4 Ohms x 2 6 Ohms x 2
6.25"
5.5"
2
AVW121
AVW 122
350 Wrms
400 Wrms
700 W
800 W
150 Oz
150 Oz
12"
12"
6.5"
5.5"
Advertisement
