Advertisement
Available languages
Available languages
ENGLISH
12
C
an official collection point.You can also take the
appliance to a Philips service centre, which will
remove the batteries for you and will dispose of
them in an environmentally safe way.
Only remove the batteries if they are completely
empty.
1
Remove the powerplug from the wall
socket and pull the appliance plug out of
the shaver.
2
Let the shaver run until it stops, open the
trimmer, undo the screws and open the
shaver.
3
Remove the batteries.
Do not connect the shaver to the mains again
after the batteries have been removed.
Troubleshooting
1
Reduced shaving performance
Cause 1: the shaving heads are dirty.
B
The shaver has not been rinsed long enough or
B
the water used was not hot enough.
Clean the shaver thoroughly before you
continue shaving (see chapter 'Cleaning').
Cause 2: long hairs are obstructing the shaving
B
heads.
Advertisement
