Pa1 Power Amplifier Rear Panel; Compatibility - Bartington PA1 Operation Manual

6. Fastening screws
7. Rocker switch
8. Lower front panel
9. Centre front panel (grille)
10. Amplifier O/P circuit breakers
4.2. PA1 Power Amplifier Rear Panel
12
11. Blank ventilation panel
12. Fastening screws
13. Coil drive output to Helmholtz Coils (HC1, HC2, HC9 or HC16)
14. Lower rear panel
15. Circuit breaker
16. Mains power input socket
5. Compatibility
The PA1 is compatible to use with Bartington Instruments Helmholtz Coils HC1, HC2, HC9 and
HC16). It is also suitable for use with Ferronato™ Helmholtz Coils BHC2000. The PA1 can also be
connected to our CU1 Control Unit and/or CU2 Closed-Loop Module.
© Bartington Instruments
BARTINGTON INSTRUMENTS
16
15
Figure 2. PA1 Power Amplifier Rear Panel
Page 6 of 17
11
14 13
12
OM3225/3