Remote Control Keys - Philips 28PW6108/01 Product Manual

Remote control keys

Screen information / permanent no.
To display / clear the program
number, name (if it exists), time,
audio mode and time remaining for
the sleep feature. Press the key for
5 seconds to activate permanent
display of the number.This key is
also used to exit from the menu.
Surround Sound
(only available on certain versions)
To activate / deactivate the
surround sound effect. In stereo,
this gives the impression that the
speakers are further apart. For
models equipped with Virtual
Dolby Surround*, you can
experience Dolby Surround Pro
Logic sound effects. In mono, a
stereo spatial effect is simulated.
VCR key (p.11)
Pre-set sound
Used to access a series of stored
settings: ,
Speech Music
and return to
To call up or exit the menus.
These 4 keys are used to move
around the menus or provide
direct access to the different 16:9
formats (p.9).
To adjust the sound level
To mute or restore the sound.
Number keys
Direct access to the programmes.
For a 2 digit program, enter the
2nd digit before the dash
Selection of EXT socket
Press several times to select
EXT1, EXT2, S-VHS and AV.
* "Dolby" and the double-D symbols
Manufactured under license of Dolby Laboratories Licensing Corporation.
,
Theatre
.
Personal
Menu
Cursor
Volume
Mute
disappears.
£
are trademarks of the Dolby Laboratories Licensing Corporation.
Radio / TV mode
To switch the TV set to radio or
TV mode (for versions equipped
with radio).
Standby
Lets you place the TV set on
standby.To turn on the TV, press
@ @ b 0 9
, , to (or
P
Teletext keys (p. 8), VCR keys
(p.11) and list of radio stations
(p. 5)
Sleep
To select an automatic standby after a
preset time (from 0 to 240 minutes).
16:9 modes (p. 9)
Pre-set image
Used to access a series of stored
settings: , ,
Bright Natural
and return to
Multimedia
Teletext (p. 8)
Program selection
To access the next or previous
programme.The number, (name)
and sound mode are displayed for
a few moments.
For some programs, the title of the
program will be displayed at the
bottom of the screen.
Teletext keys (p.8)
or VCR keys (p.11)
Sound mode
Used to force programmes in
to or, for bilingual
Stereo Mono
programs, to choose between
or . For TV sets equipped
I Dual II
for Nicam reception, depending on
the programmes, you can force the
sound to
Stereo Nicam
select between
Nicam Dual I
and
Nicam Dual II Mono
The indication is red when in
Mono
forced position.
Â
).
ı
,
Soft
.
Personal
Dual
or
Mono
,
.
3