3.1.4 Removing the Rear bracket
(See Fig.4)
(1) Remove the one screw D attaching the Remote cable.
(2) Remove the one screw E attaching the LINE OUT jack.
(3) Remove the two screws F attaching the Connector jack.
(4) Remove the one screw G attaching the Antenna jack.
(5) Remove the one screw H attaching the IC bracket.
(6) Remove the three screws J attaching the Rear bracket.
3.1.5 Removing the Main board assembly
(See Fig.5)
(1) Remove the two screws K attaching the Main board as-
sembly.
(2) Disconnect the connector
assembly.
3.1.6 Removing the CD mechanism assembly
(See Fig.6)
(1) Remove the three screws L attaching the CD mechanism
assembly.
1-8 (No.MA287)
CN501
connected to CD board
J
D
G
E
H
Fig.4
K
CN501
Fig.5
L
L
Fig.6
J
F
F
J
K
L