Advertisement
Quick Links
Br828 Series User Guide
1. General Information
1.1 Device Specification
Dimension
Weight
Marking
Charger input
Battery
Operating Temperature
Device Info
Daviscomms Organization Chart
86(L) X 61(W) X 21(H) mm
110 grams
FCC, CE (in progress)
100~240VAC,50~60Hz,600mA
3.7V 1320mAh lithium polymer
-10˚C to +50˚C
Br828P - POCSAG Alphanumeric Pager
Br828PG - POCSAG Alphanumeric Pager with 2G/3G
Br828PGT- POCSAG Alphanumeric Pager with 2G/3G & GPS
Br828PGTW- POCSAG Alphanumeric Pager with 2G/3G,GPS & Wi-Fi
Location tracking coordinates Br828PGT is by GPS. Wi-Fi positioning and messaging
is added in Br828PGTW.
General Information
Daviscomms Confidential
Advertisement
Related Manuals for Daviscomms Br828 Series
Summary of Contents for Daviscomms Br828 Series
- Page 1 Br828 Series User Guide 1. General Information 1.1 Device Specification Dimension 86(L) X 61(W) X 21(H) mm Weight 110 grams Marking FCC, CE (in progress) Charger input 100~240VAC,50~60Hz,600mA Battery 3.7V 1320mAh lithium polymer Operating Temperature -10˚C to +50˚C Device Info...
-
Page 2: General Information
Br828 Series User Guide 1.2 RF Mode Power Level (a) Pager VHF/UHF 900MHz EIA Selectivity: 50dB 40dB EIA Spurious and Image 50dB 40dB Rejection: IM Rejection: 50dB 40dB (b) Wi-Fi, 3G/GSM, GPS Supported Band Power Level WLAN 802.11b/g/n 1Mps/ 6Mps/ 6.5Mps 850 / 900 MHz 32.5 dBm... - Page 3 Br828 Series User Guide 1.2 Device Description General Information Daviscomms Organization Chart Daviscomms Confidential...
- Page 4 Br828 Series User Guide 1.3 General Device Feature Large TFT color Display,2.2inch,320x240pixels Normal display : 6lines, up to 25 characters per line. 6 buttons user interface Up to 200 messages per folder Up to 500 characters per message 3 individual alarms with choice of day with weekly repeat...
-
Page 5: Additional Info
Br828 Series User Guide 2. Additional Info 2.1 Br828 Configurator The user will receive the configurator software as a .zip file. - Run the configurator setup file and follow the installation instructions. If Br828 is used the configurator for the very first time, USB driver is needed to install. -
Page 6: Getting Started
Br828 Series User Guide 3. Getting Started 3.1 Charging the Battery Getting Started Daviscomms Organization Chart Daviscomms Confidential... - Page 7 Br828 Series User Guide 3.2 Reset Button 3.3 Powering the device On & Off To Power ON Press and hold the Right/Power key for 2 seconds, release and the device will power on with a screen that show the word “...
- Page 8 Br828 Series User Guide 3.4 Idle Screen Unlock & Soft keys3 Getting Started Daviscomms Organization Chart Daviscomms Confidential...
- Page 9 Br828 Series User Guide 3.5 Main Screen Icons GSM OFF mode Getting Started Daviscomms Organization Chart Daviscomms Confidential...
- Page 10 Br828 Series User Guide 3.6 Inserting and removing SIM Card (Not for Br828P) Getting Started Daviscomms Organization Chart Daviscomms Confidential...
- Page 11 Br828 Series User Guide General Setting 4.1 Message (a) Receiving Messages When a new page/sms message is received, the device will sound alert and turn on the status LED (for 5 seconds). These messages will go into the page or sms message folder accordingly. If the message folder is full, the oldest message will be removed to make way for news messages.
- Page 12 Br828 Series User Guide 4.2 Clock (a) Date Setting - Select Menu>CLOCK>DATE SETTING>Set date value - Press < > Set date format - Press < > Set day, month or year - Press < > Set date value Choose <Back> to set.
- Page 13 Br828 Series User Guide (c) Alarm Setting Three independent alarms clock are available. Each alarm clock can be configured to run once only or to be repeated weekly. User can have choice of day of week for the alarm to repeat in, e.g. different time for weekdays and weekends.
- Page 14 Br828 Series User Guide 4.3 Alert (a) Alert mode setting The device has four audio alert settings. They are: • Audio + vibration • Audio only • Vibrate only • Silent - Press < > Set audio, vibrate, silent mode Choose <Select>...
- Page 15 Br828 Series User Guide 4.4 Device Setting (a) Brightness Control - Select Menu> Device Setting > Brightness Level > Set the brightness level for the screen. - Press Up/Down key < > to adjust the brightness. (b) Volume level - Select Menu> Device Setting > Volume Level > Set the volume level for the device.
- Page 16 Br828 Series User Guide 4.5 Shortcut keys General Setting Daviscomms Organization Chart Daviscomms Confidential...
- Page 17 Br828 Series User Guide 5. Br828P - POCSAG Alphanumeric Pager The device will only receive page from the pre-defined CAPCODES and recognize the following message types. Page Messages - a page intended for a single pager or group of pagers.
- Page 18 Br828 Series User Guide 5.2 Message Three message folders for BR828P. Page Messages - all page messages will go into this folder Archive Messages - any message from Page & News folder can be (manually) archive into this folder. News Messages - all news page messages will go into this folder...
- Page 19 Br828 Series User Guide (b) Reply, Archive & Delete the page message - Select < OPTION> on the Message screen to choose <Reply> , <Archive> or <Delete>. Note: Canned message reply feature is not available on Br828P. (c) Archive the page Message User can archive a page message and it will be moved to the Archive message folder.
- Page 20 Br828 Series User Guide (e) News Filter News can filter out to avoid filling the news folder with unwanted news. Filtered news will not be received by the device. When a news is turned on, any new news will then be accepted and start going into the news folder.
- Page 21 Br828 Series User Guide 5.5 Keypad Program (1) Set pager password. - Select MENU> Device Setting>Keypad program> set pager password (6 digits) - Press up & down keys to adjust the numbers for password. -Press left & right arrow keys to go for another digit.
- Page 22 Br828 Series User Guide 6. Br828PG - POCSAG Alphanumeric Pager with 2G/3G The device can be configured to make outgoing calls to predefined numbers. Up to 10 predefined numbers can be stored in the device. These numbers are separate from the incoming numbers.
- Page 23 Br828 Series User Guide 6.2 Message It will have 4 folders for the messages • SMS message folder- all SMS messages will go into this folder • Page message folder- all page messages will go into this folder • News message folder- all news messages will go into this folder •...
- Page 24 Br828 Series User Guide (b) Reply, Archive & delete a Message - Select <OPTION> in the message screen to choose <Reply>, <Archive> or <Delete>. Note A reminder alert (interval which is setup by user) for unread messages when mode is set to audio or vibrate.
- Page 25 Br828 Series User Guide If GSM is in OFF mode, the auto-acknowledgement will not be sent out. Instead it will be stored in Memory, pending for the GSM to come back on. Up to 5 auto-ack messages can be put in pending and if new auto-ack message comes in, the oldest pending message will be pushed out.
- Page 26 Br828 Series User Guide 6.3 Phone (a) Incoming Call The device can be configured to accept any incoming calls or only predefined numbers. Up to 10 predefined numbers can be stored. The device can also be configured not to accept any incoming calls via the Configurator.
- Page 27 Br828 Series User Guide (e) Contacts Up to 10 predefined numbers can be stored in the device. Outgoing Call / SMS reply -Select <OPTION> in the Phone screen to choose <CALL> or < SMS reply >. Note: The user can call out from the predefined numbers and reply SMS from the canned messages list.
- Page 28 Br828 Series User Guide 6.4 GSM Module feature GSM OFF Mode The device can turn ON and OFF the GSM Module. GSM OFF mode is to off all wireless transmit. - Press and hold the Left Soft Key for 2 seconds to switch to GSM OFF mode in Main screen.
- Page 29 Br828 Series User Guide 7. Br828PGT- POCSAG Alphanumeric Pager with 2G/3G & GPS Br828PGT has GPS feature to report its location on demand via Daviscomms Tracking Server. 7.1 Additional GPS Feature Location tracking Map Link URL via SMS Geo-fencing 7.2 Location Tracking Auto tracking - To set the tracking, enable auto tracking with time interval via configurator.
- Page 30 Br828 Series User Guide 9. How to get help Get the latest User Guide, Latest brochure and configurator at Daviscomms website. Website: www.daviscomms.com.sg If your are having problem, contact DAVISCOMMS (S) PTE LTD 10. Contact information Daviscomms Factory Daviscomms (Head) office Daviscomms (Malaysia) Sdn Bhd Daviscomms (S) PTE LTD.