Ready Net AC1200M User Manual page 6

Step 1. Pick up phone and press "****" to start IVR.
Step 2. Choose "2", and the AC1200MS reports current WAN Port IP Address.
Step 3. Input the new WAN port IP address with the end char #.
Using "*" to replace ".", user can input 192*168*20*168 to set the new IP address
2
192.168.20.168.
Press # key to indicate you have finished.
Step 4. Report "operation successful" if user operation is correct.
If at any time you want to quit, press "**".
Step 1. Pick up phone and press "****" to start IVR.
Step 2. Choose "3", and the AC1200MS reports the current WAN port subnet mask.
Step 3. Input a new WAN port subnet mask with the end char #.
Using "*" to replace ".", user can input 255*255*255*0 to set the new WAN port subnet mask
3
255.255.255.0.
Press # key to indicate you have finished.
Step 4. Report "operation successful" if user operation is correct.
If at any time you want to quit, press "**".
Step 1. Pick up phone and press "****" to start IVR.
Step 2. Choose "4", and the AC1200MS reports current gateway.
Step 3. Input the new gateway with the end char #.
Using "*" to replace ".", user can input 192*168*20*1 to set the new gateway 192.168.20.1.
4
Press # key to indicate you have finished.
Step 4. Report "operation successful" if user operation is correct.
If at any time you want to quit, press "**".
Step 1. Pick up phone and press "****" to start IVR
Step 2. Choose "5", and the AC1200MS reports current DNS
Step 3. Input the new DNS with the end char #
Using "*" to replace ".", user can input 192*168*20*1 to set the new gateway to
5
192.168.20.1
Press # key to indicate you have finished
Step 4. Report "operation successful" if user operation is correct.
If at any time you want to quit, press "**".
Step 1. Pick up phone and press "****" to start IVR.
Step 2. Choose "6", and the AC1200MS reports "Factory Reset".
Step 3. Prompt "Please enter password", inputting password is the same as in operation 1.
6
If at any time you want to quit, press "*".
Step 4. Prompt "operation successful" if the password is correct.
Step 5. Press "7", reboot to make changes effective.
Step 1. Pick up phone and press "****" to start IVR.
Step 2. Choose "7", and the AC1200MSs report "Reboot".
7
Step 3. Prompt "Please enter password", inputting password is the same as in operation 1.
Step 4. The AC1200MS will reboot if the operation is correct.
Version 1.4 P a g e | 3