Philips DVP3000K Service Manual page 10

www.freeservicemanuals.info
Software upgrade
A. Preparation to upgrade software
1) Start the CD Burning software and create a new CD
project (Data Disc) with the following setting:
Label: DVP3XXX
File System: DVP3000K_13.BIN
DVP3000K_69.BIN
DVP3000K_93.BIN
DVP3005_00.BIN
DVP3005_02.BIN
DVP3005_04.BIN
DVP3005_78.BIN
DVP3005K_78.BIN(.for DVP3005k/78)
DVP3005K_93.BIN(.for DVP3005k/93)
DVP3010_00.BIN
DVP3010_02.BIN
DVP3005K_69.BIN
Label: _____ (No need the label
File System: DVP3000_51.BIN
DVP3005_69.BIN
DVP3500_37.BIN
DVP3005_94.BIN
DVP3007_94.BIN
Note: It is required capital letter for the Label name &
the File System name.
2) Burn the data onto a blank CDR
B. Procedure for software upgrade:
1) Power up the set and insert the prepared Upgrade
CDR.
2) The set will starts reading disc & response with the
following display TV screen:
Upgrade File DETECTED
Upgrade?
Press Play TO START
3) Press <OK> button to confirm, then screen will display :
Files coping...
UPGRADING...
3) The upgraded disc will automatically out when files
coping complete, then take out the disc.
4) About 1 minute later, the trace will automatically close
when upgrading complete.
(for DVP3000K/13/75)
(for DVP3000K/69)
(for DVP3000K/93)
(for DVP3005/00/05)
(for DVP3005/02)
(for DVP3005/04)
(for DVP3005/78)
(for DVP3010/00/05)
(for DVP3010/02/04)
(for DVP3005K/03/13/69/75)
name)
(for DVP3000/51)
(for DVP3005/69)
(for DVP3500/37)
(for DVP3005/94)
(for DVP3007/69/94)
3-1
C. Read out the software versions to confirm upgrading
1) Power up the set and press <system menu> button on
the remote control.
2) Press <1><3><7><9> button.
The software version and other information are display
on the TV screen as follows:
Version
SUB-VER
8032
Servo
RISC
DSP
Region Code
Caution: The set must not be power off during
upgrading, in that case the decoder board will
be damaged entirely.
World of Free Manuals
XX.XX.XX.XX (Main version)
XX.XX.XX.XX ( software version of
application software)
XX.XX.XX.XX
XX.XX.XX.XX (software version of Servo)
XX.XX.XX.XX
XX.XX.XX.XX
X