Mechanical, or otherwise without the prior written permission of Calixto Systems. No warranty of accuracy is given concerning the contents of the information contained in this publication. To the extent permitted by law no liability...
This document talks about details of Calixto’s Telit xE910 family based modems. Telit offers its customers a form factor and family concept. Part of this concept is the xE910 family of wireless modules featuring a single, compact form factor that is interchangeable on any regional cellular network, delivering ubiquitous, cost-effective coverage for M2M applications and consumer electronics devices worldwide.
50mm x 75 mm 3. Calixto CST-xE910-XX-MODEM ordering Info 3.1 Product Variants There are many variants of the module available: • Standard modem with xE910 modules varieties are: o CST-HE910-XXX-MODEM (XXX is for different variation of HE910-EUD, EUG etc). o CST-CE910-SC-MODEM o CST-GE910-XX-MODEM •...
CST-xE910-MODEM-BC modem has additional battery connector. This is a 2 pin RELIMATE connector (location B1). 5.5 USB – Mini USB connector: Calixto xE910 modems come with USB device connector (at J4). USB is directly connected to USB signals of modules. Please note that GE910-QUAD-V3 does not have USB interface.
This DB9 connector has main UART of the xA910 module in RS232 level. There is also DCD, RING pins from the module in RS232 level. There is also GSM_RESET, ON_OFF input signals to GL86x module at 0-3.6 V level directly to this DB9 connector. These extra pins allow customers to utilize the xE910 module completely. Pin No...
GPIO_2 CMOS 1.8V GPIO_2 from Module GPIO_3 CMOS 1.8V GPIO_3 from Module GPIO_4 CMOS 1.8V GPIO_4 from Module Digital Ground 6. Telit Module Details: Calixto xE910 module designed for all members of Telit’s xE910 family of modules.
Input Power Supply -DC 9-24V 9-24V Operating Temperature Relative humidity - Operational 8. Communicating with Modem 8.1 Serial Interface mechanism Customers can interface the modem through main (DB9 Connector). Following are the serial interface format used in Calixto GL86x modem in below figure:...
The CST-GL868-MODEM is built around Telit GL86x module. Customers can follow all the programing mechanism suggested by Telit. Communication Software Customer can use any serial terminal program in PC to communicate with modem. We have used “rsterm” for our development and test. Below figure shows typical screen shot of “rsterm”. Customer can use either AT commands or program the GL86x module with Python script defined by Telit.
Page 14
6. Telit IP Easy User Guide_r15 (80000ST10028A rev 15-2013-02-19)
9. Legal Notice 9.1 Customer Support: Calixto Systems are excited to offer our customers an easy “out of box” experience by providing board support package, software demos, user manuals and other electro mechanical documentation to get our evaluation modules up and running. We also provide further electronic (email, wiki and discussion forum) support for evaluation of our modules using corresponding Calixto boards.
Calixto systems. • Calixto systems shall own all parts removed from repaired products. • Calixto systems will use parts made by various manufacturers in performing the repair. This can be different from the components used in the original products. • The repaired products shall be warranted subjected to the original warranty only (If the original warranty...
Need help?
Do you have a question about the xE910 and is the answer not in the manual?
Questions and answers