Advertisement
Quick Links
CAUTION: TO PREVENT BATTERY DAMAGE: DO NOT USE on gel batteries or
AGM (absorbed glass mat) type batteries.
Do not operate the Battery Maintainer in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Electrical products create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating the Battery Maintainer. Distractions can
cause you to lose control. Protect others in the work area from sparks. Provide barriers or shields as needed.
Grounded products must be plugged into an outlet properly installed and grounded in accordance with all
codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any
adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
Double insulated products are equipped with a polarized plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.
Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is grounded.
Do not abuse the Power Cord. Never use the Power Cord to carry the Battery Maintainer or pull the Plug from
an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power
Cords immediately. Damaged Power Cords increase the risk of electric shock.
FJC, Inc
Part # 52010
12V BATTERY Charger/Maintainer
INPUT: 110V AC 60Hz
INSTRUCTION MANUAL
SAFETY WARNINGS AND PRECAUTION
.
OUTPUT: 6/12V DC 1A
Advertisement
Summary of Contents for FJC 52010
-
Page 1: Instruction Manual
FJC, Inc Part # 52010 12V BATTERY Charger/Maintainer INPUT: 110V AC 60Hz OUTPUT: 6/12V DC 1A INSTRUCTION MANUAL SAFETY WARNINGS AND PRECAUTION CAUTION: TO PREVENT BATTERY DAMAGE: DO NOT USE on gel batteries or AGM (absorbed glass mat) type batteries. - Page 2 An extension cord should not be used unless absolutely necessary. If an extension cord is used, make sure wire size is large enough to operate battery maintainer. Stay alert, watch what you are doing, and use common sense when operating the Battery Maintainer. Do not operate the Battery Maintainer under the influence of drugs, alcohol, or medication.
-
Page 3: Display Features
Read the ENTIRE IMPORTANT SAFETY WARNINGS AND PRECAUTIONS section at the beginning of this manual before set up or use of this product. Display Features Voltage Switch Switch to 6v or 12v for the battery type that is to be charged. ... -
Page 4: Charging Stages
Charging Stages 1. When the battery charger is charging the red LED indicator light will light up showing the battery is being charged. 2. The red LED light will go off when the battery is fully charged and the battery charger/maintainer has entered the float stage. -
Page 5: Warranty
This Battery Maintainer is warranted to be free from defects in material and workmanship under normal use and service for 1 year after the sale of this product by FJC, Inc. FJC’s sole obligation under this warranty shall be to repair or replace any defective product or parts thereof, which are returned to our factory. The warranty shall not apply to any product or part which has been subject to misuse, negligence or accident.