•
Supports DDMA, Support for legacy DMAC Emulation
•
64-Voice Wavetable Synthesis w/ DLS-1 Support
•
Programmable independent sample rate from 8 kHz up to 48 kHz for Record and Playback
•
Supports Sound Blaster ADPCM decompression
•
D Effect Sound Enhanced Normal & Digital Game Port Support
Software-controllable audio
•
Supports various audio devices all controllable through software
•
Adjusts master volume, CD audio, line-in, AUX, mono in, mono out, synthesis wave and
microphone inputs
Stereo digitized voice channel
•
16-Bit Full-duplex for Concurrent Recording and Playback
1 Line-out port
2 Line-in port
3 Microphone-in port
Figure 1-1 AW200 Audio Card Layout
2.1 Installing the Card
Follow these steps to install the card:
1. Turn off the system and all the peripherals connected to it.
2. Remove the system cover to access the expansion slots.
1.2 Card Components
6 Mono in for internal Modem
7 Mono out for internal Modem