Standard Setting-Up Position (If Using The Et-Dle030) - Panasonic PT-DX820W Manual

DLP™ Projectors

Standard setting-up position (If using the ET-DLE030)

Upper edge of
projected image
Projected image
Lower edge of
projected image
Projected image
C a u t i o n :
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling
down from the ceiling, use the supplied wire on the mounting bracket.
As of February 2017
SFD15M025-2
PT-DX820W/DX820LW/DX820B/DX820LB
ø60.5
(2-3/8)
L4 331.3 166.7
(13-1/32) (6-9/16)
L3
L1
L1
L3
L4
175
(6-7/8)
200
(7-7/8)
308
(12-1/8)
NOTE:
Illustrations show the projector installed using
optional ceiling mount bracket (6-axis adjustment
mechanism) ET-PKD130H, optional bracket assembly
ET-PKD130B and an optional lens.
*1 Continuous height adjustment possible
NOTE:
Illustrations show the projector installed using
optional ceiling mount bracket (6-axis adjustment
mechanism) ET-PKD130H, optional bracket assembly
ET-PKD130B and an optional lens.
This illustration is not drawn to scale.
unit : mm (inch)
9 / 1 6