Advertisement
4. Dismantling
The tool should only be taken apart by an
expert!,
1. Loo!jen screws (20, 21), remove handle cover (19)
.
2. Clamp off cable from switch (12), clamp off capacitor (17) at
motor housing (1)
.
3.
Clamp off carbon cable, pull carbon brush (5) out of
holder.
4.
Loosen screws (80, 81). remove and dismantle percussion drill
head (37) with intermediate bearing (36).
5.
Unscrew morse
taper.
Unscrew screws (72) and remove
sleeve (69)
.
6. Pull armature out of motor
housing.
7. Pull air conducting ring (10) out of motor housing, loosen
screws (9), take out pole housing (7)
.
5. Repair and Spare Parts
We recommend our Fein Service Stations to carry out all over-
haul and repair work quickly and
expertly.
'Please quote Order Reference when ordering spare parts or
send in sample part.' stating the type of the
machine.
·
We draw your attention to the need to carry out a high voltage
test in accordance with your local regulations (or VDE regu-
lation 0740) before taking a tool into service
after.
any repair
carried out by your own
sfaff.
(
(
Advertisement
