Advertisement
IMPORTANT SAFEGUARDS
When using this electrical appliance, especially when children are present, basic safety
precautions should always be followed including the following.
TO REDUCE THE RISK OF FIRE AND INJURY
1. This appliance can be used by children from aged 8 years and above and persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. Switch off the appliance and unplug from outlet when not in use, before putting on or taking off attachments and
also before cleaning the appliance.
3. Never use your appliance without paying attention! Always unplug the unit when not in use, even for a moment.
4. Do not operate the appliance with a broken cord or plug, or if the appliance malfunctions, or is dropped or
damaged in anyway.
5. Do not wrap the cord around the appliance.
6. Any servicing or repair must be performed by an authorized service representative.
7. Do not use outdoors or in damp areas.
8. Do not let the cord hang over the edge of the work surface or let it touch any hot surfaces.
9. The use of attachments that are not supplied by the manufacturer may cause fire, electric shock or injury and
damage to the appliance.
10. To protect against risk of electrical shock, never immerse the unit or let it come into contact with water or any
other liquids. Do not use the unit with wet hands. If the appliance should become wet, damp or fall in water,
remove plug from mains socket immediately. Do not put your hands in the water. Do not take into bathroom.
11. Never carry the unit by its power cord.
12. Do not drop or insert any object into any opening.
13. Use this appliance only for its intended purpose.
14. As a precaution safety glasses should be used at all times, when using this appliance. Long hair should be tied
back and jewellery should be removed to avoid any contact with moving parts of the machine.
15. Never operate this appliance with the air openings being blocked or while on a soft combustible surface, such as a
bed or sofa, where air openings may be blocked. Keep the air openings (if any) free from lint, hair or the like.
WARNING: KEEP THE APPLIANCE DRY.
OPERATING INSTRUCTIONS
1.
Using your thumb, apply light to moderate pressure to your pet's pads in order to separate their toes. Hold paw firmly.
2.
Turn appliance ON. The ON/OFF switch is located on the front of the appliance.
3.
For best results, start filing from the bottom of the nail, slowly moving toward the tip. Apply consistent pressure, moving the grinder from side to side on
each nail.
WARNING: DO NOT OVER-FILE OR APPLY EXCESSIVE PRESSURE.
4.
To avoid tangling of hair on long-haired breed dogs, push hair away from pets paw before using the appliance. For best results, use a nylon stocking over pets
paw and push nails through stocking.
5.
For larger dogs, position the front paw forward in order to file nails.
6.
For smaller animals, hold their paw up and position it below their body. Pay extra attention not to entangle hair.
CHANGING ATTACHMENTS
1.
Ensure appliance is in the OFF position before changing attachments.
2.
To unlock the locking nut, simply press on the release button located at the top/front of the machine.
3.
Press your thumb firmly on the release button; turn the locking nut counter clockwise until the attachments release.
4.
While pressing on the release button, insert attachment head as far as it can go. Turn the locking nut clockwise until it tightens and is secured into place.
5.
Remove thumb from release button.
APPLYING FILING BANDS TO FILING DRUM
1.
Select either the 60 or 100 sanding grit filing band (60 grit medium sanding band for quick efficient filing down of your pets nail; 100 grit fine filing band
for smoothing uneven rough nails).
2.
Place the filing band over the filing drum until it is in place (please note, you will find it sits loosely over the grinding drum). In order to properly secure its
placement, use a screw driver to adjust the screw at the top of the filing drum. Screwing it in a clockwise direction will allow the drum to expand, creating
the perfect fit.
Advertisement
