Flex ERGO Owner's Manual page 21

Calls and functions
Incoming/outgoing handset volume
The volume of your caller's voice in the earpiece can easily be adjusted
when you are in a call. To be able to adjust the volume of your own voice
to your caller's earpiece, the Amplify switch on the underside of the phone
must be set to Out. The default setting for this switch is In.
Volume controls and amplification
The volume level of the earpiece, speaker or microphone is raised or
lowered with the volume controls.
The loudspeaker has five volume levels. The default setting is 3. The handset
has five volume levels to amplify incoming speech, and three volume levels to
adjust the outgoing voice. The default setting is minimum.
Redial
You can redial the last number called.
• Lift the handset or press
• Press
Secrecy
You can stop your caller hearing you so you can talk privately to someone
else. Secrecy mode is indicated by the flashing indicator light in the secrecy
button. Press
Handsfree calls
You can make and end calls with the handsfree button. It is also possible to
switch from handsfree to handset (and vice versa) during a call.
ergo
to dial the last called number
again to resume your call.
and wait for dial tone
UK-8