Wadkin LS Operating And Instruction Manual page 24

- -
...
®
Locating pieces.
Many articles to be shaped on the router require machining
all round, such as bag handles, coat hangers, some types
of brush handles, etc. For this class of work it is advant-
ageous to make a jig carrying two components.
METHOD OF OPERATING JIG:-
1. Put prepared blank in position A and rout outer edge.
2 Move shaped blank into position B locating off
previously cut edge
3 Place a new blank in position A. With the jig now
fully loaded a finished handle will be produced at
each complete circUlt of jig
Page 2:1
(
\
\
'--
/
Actual shape of
template.
_ _ _ _ _ _ _ _ _ --.-1
I
"-
"-
)