Troubleshooting - Seiki SE32HO02UK Manual

7528%/(6+227,1*
If your TV does not operate normally or cannot be turned on, please check the
IROORZLQJ WURXEOHVKRRWLQJ TXHVWLRQV 5HPHPEHU DOVR WR FKHFN DQ\ RWKHU FRQQHFWHG
electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV
still fails to operate normally, please contact technical support.
The TV does not operate properly
The TV does not respond
when pressing any buttons
TV cannot be switched on
The remote control does not
work
Power is suddenly turned off
7KH YLGHR IXQFWLRQ GRHV QRW ZRUN
No picture & No Sound
Picture appears slowly after
switching on
No or poor colour or poor
picture
+RUL]RQWDO9HUWLFDO EDU RU
picture shaking
Poor reception on some
channels
Lines or streaks in pictures
No pictures when connecting
HDMI
Pictures appear in wrong
ratio
‡ 7KH 79 PD\ IUHH]H XS GXULQJ XVH 'LVFRQQHFW WKH SRZHU
cord from the power socket for a few minutes. Reconnect the
power cord and try to operate it again as usual.
‡ Check that the TV is connected to the power supply.
‡ Make sure all connected AV devices are switched off before
switching on your TV.
‡ Check to see if there are any objects between the TV and the
remote control causing an obstruction. Ensure that you are
pointing the remote control directly at the TV.
‡ Ensure that the batteries are installed with the correct polarity
(+ to +, - to -).
‡ Install new batteries.
‡ Check the power of the TV. The power supply maybe
interrupted.
‡ Check if the sleep timer is set.
‡ Check whether the Auto Standby is activated.
‡ Check whether the TV is switched on.
‡ Try another channel. The problem may be caused by the
broadcaster.
‡ 7KLV LV QRUPDO WKH LPDJH LV PXWHG GXULQJ WKH 79 VWDUWXS
process. Please contact your service centre if the picture has
QRW DSSHDUHG DIWHU ¿YH PLQXWHV
‡ Adjust the settings in the PICTURE menu.
‡ Try another channel. The problem may be caused by the
broadcaster.
‡ Check if video cables are connected properly.
‡ Check for local interference such as an electrical appliance
or power tool.
‡ 7KH VWDWLRQ RU FDEOH FKDQQHO PD\ EH H[SHULHQFLQJ SUREOHPV
tune to another station.
‡ Station signal may be weak, reposition the antenna for better
reception.
‡ Check for sources of possible interference.
‡ Check antenna (change the position of the antenna.)
‡ Check if the input source is HDMI.
‡ Adjust the Aspect Ratio settings in the SETUP menu or press
the ASPECT button on the remote control.
33