Table of Contents
Advertisement
Timer menu
This menu allows you to use your TV as an alarm clock.
In the FEATURES menu:
Video recorder key
8
Select TIMER ( ) and press
Use the
key to select the following settings:
TIME: enter the current time (
N.B.: Every time the TV is switched on, the clock is automatically updated on the
basis of the teletext information in programme No. 1. If the TV set does not feature
teletext, this update will not occur.
PROG. NO (programme number): enter the number of the programme.
START TIME: enter the time at which you wish the TV to switch on.
STOP TIME: enter the stop time (automatic stop).
ACTIVATE (this setting is hidden at the bottom of the screen).
Use
to activate the programming ONCE or DAIL for every dayY.
The STOP position is used to cancel the timer.
Press
to set the TV to standby. It will automatically switch on at the time
programmed. If you leave the TV switched on, it will only change programme
at the time indicated.
The combination of the LOCK and TIMER functions may be used to limit the length
of time your television is in use, for example, by your children.The ONCE position
allows you to programme the start time or the stop time (but not the both)
The
is used for the main functions of the video recorder.
Hold down the
/
P
OK
* Some programming functions are not available on all models
(cursors, menu, OK key, etc.).
The remote control is compatible with all the video recorders in our
range as well as models which use the RC5 signalling standard.
.The TIMER menu appears.
or
keys).
key, located on the side of the remote control
key to access the following functions:
standby,
enter a programme number,
display the VCR menu*
selection*
adjustment*
programme selection,
record,
rewind,
stop,
play,
fast forward,
programming (on certain models),
validation.
Advertisement
Table of Contents
