Setting Up The Monitor; Installation - Philips 227E3L User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
VGA (optional)
Register your product and get support at 227E3
www.philips.com/welcome
Quick
Start
Audio cable (optional)
DVI (optional)
4
Install base stand
1. Place the monitor face down on soft
and smooth surface taking care to avoid
scratching or damaging the screen.
2. Hold the base stand with both hands and
firmly insert the base stand into the base
column.
(1) Gently attach the base to the base
column until the latch locks the base.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
2
1