Argos LIQUIDISER Instruction Manual page 8

• Thick mixtures, e.g. pâtés and dips, may need scraping down. If the
mixture is difficult to process, add more liquid.
• Do not switch on your blender if the jug is empty. The cutter
bearing may be damaged if run at "No Load".
• Cut cooked meats into one centimeter before adding into jug.
Please do not add raw meats.
• Do not use the blender jug for storing beverages or foods.
CLEANING
• Always switch off, unplug and dismantle before cleaning.
• Never let the power unit, cord or plug get wet.
• Don't wash any parts in your dishwasher.
• The pulse button allows you to clean the blender and the blade
easily, rapidly and in complete safety.
• Pour a little lukewarm water into the jug.
• Turn to pulse function for a few seconds.
• Remove the jug and rinse under running water.
• Wipe and clean the motor housing with a damp cloth. Never
immerse in water.
• Thorough cleaning the blade unit
1. Empty the jug before unscrewing the blade unit.
2. Remove the blade unit from the goblet by turning to the
unlock position to release.
3. Remove and wash the sealing ring.
4. Don't touch the sharp blades – brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5. Leave to dry upside down.
8