Advertisement
Panorama Crib
Assembly Instructions
Carefully fit the top of side panel onto support brackets of end panels, and slide bottom of end panel into place as
shown. Secure support bracket of each end panel to side panel with 1 small bolt. Secure support bracket of each end
5
panel to side panel with 2 small connecting bolts, 2 lock washers and 2 brackets as shown. At this point, fully tighten all
bolts in the crib.
NOTE: Please remove plastic
wrapping from crib slats prior
to using crib
Insert 4 wood dowels into bottom of crib assembly as shown, and fit into corresponding holes of base frame. Secure
6
base frame to crib assembly with 4 large connecting bolts and 4 lock washers as shown, using an Allen wrench.
Carefully, position crib upright. Assembly is now complete.
CLEANING AND CARE:
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically check and tighten hardware as necessary.
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com
Advertisement
