INTRODUCTION Thank you for purchasing our Detecto ProDoc Series DHRWM Wall Mounted Digital Height Rod. Your digital height rod has been designed for simple and straightforward use and to assure accuracy and dependability for years to come. Please read this manual thoroughly before attempting to use your scale and keep it handy for future reference.
6. DO remove power before cleaning with a damp cloth. DISPLAY MESSAGES The Detecto ProDoc Series DHRWM Wall Mounted Digital Height Rod is equipped with software that tests various portions of its circuitry and verifies proper operation. The following messages are displayed to alert the operator should a problem be detected.
Remove all plastic wrapping, foam fillers and cardboard material from the height rod, display and other components. You should have the following components: (1) Detecto Wall Mounted Digital Height Rod (DHRWM) (1) Remote Display (1) Display Wall Bracket “A”...
INSTALLATION Mounting the Height Rod 1. Choose the location to mount the height rod on the wall. The location should be free of temperature extremes and water. It should be where it is within easy reach of the operator. 2. Make certain the structure and mounting hardware are of sufficient strength to support the height rod.
INSTALLATION Mounting the Display The DHRWM display has a 69” (175 cm) cable to allow it to be placed at a convenient position away from the height rod. A bracket is included to mount the display on a wall or the bracket (and included feet) can used to place it on a desk for easy viewing.
Page 8
INSTALLATION Wall Mounting, Cont. 7. Referring to Figure No. 3, make sure the four (4) feet of Display Wall Bracket “A” are placed in the bracket. Display Feet (for Desk or Table Mounting) Display Wall Bracket “A” Figure No. 3 Figure No.
Page 9
INSTALLATION Desk or Table Mounting 1. The location chosen should be a stable, level surface (either a desk or solid table), free of temperature extremes and water. The display should be where it can be easily viewed, not subject to direct sunlight and where the keypad is within easy reach of the operator. 2.
BATTERY OPERATION Battery operation is a standard feature of the ProDoc Series Wall Mounted Digital Height Rod, although the batteries are optional (not included). You must first obtain and install four (4) "AA" size alkaline batteries before operations can begin. Batteries are contained in a battery holder inside the display.
OPERATION Keypad Functions DO NOT operate the keypad with pointed objects (pencils, pens, etc). Damage to keypad resulting from this practice is NOT covered under warranty. The UNITS key is used to change the height units between feet/inches and centimeters. With the display off, pressing the ON/OFF key will apply power and turn on the display.