Self Check - Panasonic TX-22LX2 Service Manual

4 Self Check

TOP PREVIOUS NEXT
1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self -Check mode press the
) button on the customer controls at the front of the set, at the same time pressing the
button on theremote control, and the screen will show :
3. Turn off the TV to reset JPEG Viewer circuit after SELF-CHECK.
If the CCU ports have been checked and found to be incorrect or not located then "--" will appear in
place of "O.K.".
TOP PREVIOUS NEXT
Down
Display Ref .No. Description
MEM IC1107 EEPROM
GC3FM IC4017 Global Core MAIN
GC3I IC4003 Global Core
HAD IC4001 SCART RGB A/D Converter DG-Board
HAD2 IC4002 OSD RGB A/D Converter
AVSW1 IC3001 AV Selector
Tun1 TU101 Tuner
MSP IC2501 Stereo Decoder
http://servis-manual.com/
(
P.C.B.
DG-Board
DG-Board
DG-Board
DG-Board
A-Board
B-Board
A-Board
Recall