TILLYTEC MAXI UNI User Manual
Hide thumbs Also See for MAXI UNI:

Advertisement

Before using the torch, ensure that you read and understand the safety advice leaflet so that the torch is
always operated correctly.
Never point the light beam at your or other persons eyes. Doing so could damage the retina.
Keep the torch away from children.
Never attempt to take the torch apart unless it is specifically directed in the operating instructions. Doing so can result in severe
injuries and electric shocks. Servicing of internal components, servicing or repairs have to be carried out by qualified persons,
authorized by the manufacturer.
If smoke or steam appears, switch off the mains or battery supply immediately. Disconnect the torch head from the battery and
remove the charger from the socket.
Do not touch the charger's power cable with wet hands as there is danger of an electric shock or short circuit. To disconnect,
depress the catch on the connector whilst withdrawing it from the charging adapter plug. Do not disconnect it by pulling on the
cable.
To prevent overheating, damage, fires, electric shocks or other dangers only use the charger and attachments supplied.
Keep the torch and battery pack away from open fires or sources of heat as it could lead to overheating, fires, electric shocks
and explosions and cause severe injury.
Never attempt to change or take apart the battery pack. To do so could lead to injury by explosion.
Do not drop the batteries or battery packs and protect them from impact. Damage could result in leakage of the battery
chemicals and result in injuries.
Clean with water all areas of the body (especially mouth and eyes) or clothing that come in contact with battery chemicals.
Never short across the battery contacts with metal objects (e.g. key rings, screwdrivers etc) as this could result in overheating
and to burns and other injuries.
After charging disconnect the charger from the battery pack and the mains socket to avoid fires or other damage.
The charger supplied with the torch has been developed for use exclusively with the torch and battery pack. Do not use it with
other products or batteries as this could result in fires or damage.
Use and store the torch, battery pack and charger away from exposure from heavy solar radiation or high temperature (e.g. the
dashboard or the boot of a car etc.). Heavy solar radiation and heat can lead to leakage, overheating or explosion of the
batteries which can result in fire other damage.
While charging the battery pack keep it in a well ventilated area.
Charge the battery pack at room temperature.
If the batteries become too warm, cease charging immediately. Normal temperature is slightly higher than "hand-hot" ( +/- 50
degree )
Let the batteries cool down after charging.
Use the torch, battery pack and accessories only when diving. Using the products or other component parts for other purposes
is not allowed.
User manual Maxi uni

Safety Advice

-1-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAXI UNI and is the answer not in the manual?

Questions and answers

Summary of Contents for TILLYTEC MAXI UNI

  • Page 1 User manual Maxi uni Safety Advice Before using the torch, ensure that you read and understand the safety advice leaflet so that the torch is • always operated correctly. Never point the light beam at your or other persons eyes. Doing so could damage the retina.
  • Page 2 - 1 x 18650 accumulator with mit space holder (optional *) - 1 x 26650 accumulator You can use with the long tube (optional): Look on homepage www.TillyTec.de, under the buton „Infomation“. • For the cell 18650 and 26650 we recommend only to use batteries from type LiCoMn (lithium – cobalt –...
  • Page 3 User manual Maxi uni...
  • Page 4 - the used LED modul - the used type of battery or accumulator. TIP : When the LED module of the MAXI uni basicis not bright enough we will send a stronger LED module for trial for free. More information about burning time and light power you will find on www.TillyTec.de –...
  • Page 5 User manual Maxi uni After the space holder is screwed hand tight, the battery tube is screwed together with the battery in the lamp • head to see if the torch is working. Screw the battery tube only slightly ! not strong ! Screw it only until the torch is on.
  • Page 6 User manual Maxi uni...
  • Page 7 User manual Maxi uni...
  • Page 8 User manual Maxi uni Last update : 01.05.2017 www.TillyTec.de...

Table of Contents