Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-0564
PANASONIC FZ-X1 / FZ-E1 POWER CRADLE
7160-0594
CRADLE-PANASONIC-FZX1/E1
This instruction sheet is for the following products:
Panasonic FZ-X1 / FZ-E1 Power Cradle
Item No. 7160-0564 (-P) (-E)
CRADLE-PANASONIC-FZX1/E1
Item No. 7160-0594
* These instructions are for the Cradle and
features, set-up and operation of the FZ-X1 / FZ-E1 computer, please refer to the manuals
provided by Panasonic with the computer.
** This Cradle and
mounting systems. Installation for other Gamber Johnson products are provided with each
individual product.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2016 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
is designed to be used with a variety of Gamber Johnson
Power Cradle
Revision
Rev. C
only. For instructions on
Power Cradle
Form
INST-647
Printing Spec: PS-004
Figure: 1
Pg 1
Advertisement
Summary of Contents for Gamber Johnson 7160-0564
- Page 1 Panasonic with the computer. ** This Cradle and is designed to be used with a variety of Gamber Johnson Power Cradle mounting systems. Installation for other Gamber Johnson products are provided with each individual product. Product Mounting Disclaimer Product Mounting Disclaimer...
-
Page 2: Pre-Installation Recommendations
PRE-INSTALLATION RECOMMENDATIONS Conduct a "Bench Test" Gamber Johnson strongly advises a "Bench Test" be conducted to verify that all electronic and software issues are resolved prior to installation: Make sure computer is operational by itself. - Page 3 MOUNTING THE CRADLE AND POWER CRADLE This Cradle and Power Cradle is designed to be used with a variety of Gamber Johnson mounting systems. Installation instructions for Gamber Johnson products are provided with each individual product. This Cradle and Power Cradle supports the AMPS and NEC hole patterns. Shown in this instruction sheet connecting using Max3 swivel (sold separatly) which will allow end user to set up for multiple positions when used with a pole.
- Page 4 Step: 5 Re-attach mounting bracket to the Cradle and Power Cradle using the same screws removed in Step: 2. Torque to 7 in-lbs. See Figure: 6 Figure: 6 Step: 6 Screw together the Max3 into its mating part that is attached to the pole. See Figure: 7 Figure: 7 Step: 7 Unlock and press the button and swing open the...
- Page 5 Wire Tie Figure: 12 Panasonic recommends using a Lind Auto Adapter (Lind part No. PA1555-968) to power the docking station. It can be ordered from Gamber Johnson (part No. 11798) or directly from Lind Electronics, Minneapolis, Minnesota (952-927-6303). Pg 5...
- Page 6 INSERTING THE COMPUTER When inserting the FZ-X1 (-E1) computer it is recommend to shut down the computer completely. Open Cradles and Power Cradle's top latch by depressing the lock button and lifting top latch from the front and rotating it backwards. When inserting the FZ-X1 (-E1) computer in, there are two guide rails located on the inside of the Cradles and Power Cradle used for aligning...
- Page 7 Regulatory Certification Information Regulatory Model #: 7160-0564 & 7160-0594 GJ Model #'s: 7160-0564, 7160-0564-P, 7160-0564-E and 7160-0594. Descriptions: Dock-Panasonic-FZ-X1 or FZ-E1 and Cradle- Panasonic-FZX1/E1 Certifications: • EN 55022:2010 CISPR 22:2008 Class B • EN 50498:2010 • EN 50581:2012 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.